Analysis of Surface Geometry Changes after Hybrid Milling and Burnishing by Ceramic Ball

The production of modern machines requires parts with much greater geometric accuracy and surface geometry (SG) precision than several years ago. These requirements are met by so-called hybrid technologies that must simultaneously be inexpensive to implement. The integration of treatment procedures (usually in one operation) is geared towards achieving a synergistic effect. Combining different treatments from various technologies produces synergy, i.e., benefits greater than the optimization of each individual process done separately. This paper presents experimental results and numerical experiment data on surface plastic deformation. The hybrid technology used in the study was a combination of milling and finishing with plastic burnishing using a ceramic ball. These processes were integrated on a multi-axis CNC machining center. The plastic deformations of real surfaces were determined in simulations. The paper also discusses the structure of the model and how to use it to conduct a finite element method (FEM) computer simulation. The aim of the study was to determine how to use the potential developed model of hybrid treatment to predict the surface performance expressed by the amplitude, volume, and functional parameters of the surface geometry, with the EN-ISO 25178-2 profile.