Related Experiment Video
Updated: Jan 26, 2026

Fabrication Process of Silicone-based Dielectric Elastomer Actuators
Published on: February 1, 2016
Synchronously Tailoring Strain Sensitivity and Electrical Stability of Silicone Elastomer Composites by the
Nanying Ning1,2, Sishu Wang3, Liqun Zhang4,5
1State Key Laboratory for Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China. ningny@mail.buct.edu.cn.
Abstract:
The use of conductive polymer composites (CPCs) as strain sensors has been widely investigated. A wide range of strain sensitivities and high repeatability are vital for different applications of CPCs. In this study, the relations of the conductive filler network and the strain-sensing behavior and electrical stability under fatigue cycles were studied systematically for the first time based on the conductive polymethylvinylsiloxane (PMVS) composites filled with both carbon nanotubes arrays (CNTAs) and carbon black (CB). It was proved that the composites could be fabricated with large strain-sensing capability and a wide range of strain sensitivities by controlling the volume ratio of CNTA/CB and their amounts. Additionally, the CNTA/CB/PMVS composite with 3 vol % content of fillers showed high sensitivity (GF is 10 at 60% strain), high repeatability (the relative standard deviation (RSD) of the max R/R₀ value is 3.58%), and electrical stability under fatigue cycles (value range of R/R₀ is 1.62 to 1.82) at the same time due to the synergistic effects of the dual conductive network of CNTAs and CB. This could not be achieved by relying on a single CNTA or CB conductive network. This study may provide guidance for the preparation of high performance CPCs for applications in strain sensors.
More Related Videos
Related Concept Videos
Electrical Conductivity
In a practical conductor, an applied electric field may be sustained, causing a flow of electrons, which produce a current. The differential form of the current, the current density, is related to the electric field.
More generally, it is related to the force per unit charge, which involves the...
Network Covalent Solids
To break or to melt a covalent network solid, covalent bonds must be broken. Because covalent bonds are relatively strong, covalent network solids are typically...
Electric Field of Parallel Conducting Plates
Consider a cross-section of a thin, infinite conducting plate having a positive charge. For such a large thin plate, as the thickness of the plate tends to zero, the positive charges lie on the plate's two large faces. Without an external electric field, the...
Nuclear Stability
To hold positively charged protons together...
RNA Stability
Protein Networks
These interactions can be represented through maps depicting protein-protein interaction networks, represented as nodes and edges. Nodes are circles that are representative of a protein,...

