Bimetallic Fe/Al system: An all-in-one solid-phase Fenton reagent for generation of hydroxyl radicals under oxic...

In the classic Fenton reaction, both H₂O₂ and ferrous ion (Fe(II)) are required under a narrow low pH range to produce hydroxyl radicals (OH). The modified Fenton processes including heterogeneous Fenton-like reaction, photo-Fenton reaction and electro-Fenton reaction developed to overcome the drawbacks of the homogeneous Fenton reaction have recently received increasing attention. However, all the modifications of the classic Fenton reaction cannot be assembled into one system and require external supply of reagents or energy. We present here, bimetallic Fe/Al, a novel solid-phase Fenton reagent capable of in situ generation of H₂O₂ and Fe(II) to form OH under near neutral pH conditions without an external energy supply. Aluminum acts as an electron donor to maintain the electron supply and preserve the outer layer of iron at the zero-valence state with enhanced surface areas. The production of OH by bimetallic Fe/Al was quantified and further detected by an electron paramagnetic resonance (EPR) analysis under oxic conditions. Radical scavenging tests were performed by adding isopropanol or 1,4‑benzoquinone in the system to investigate the nature of the oxidants produced during the oxidative process. Bimetallic Fe/Al system for the Fenton reaction in water involves both surface-mediated and aqueous-phase reactions. A pilot scale test using a continuous-flow column packed with Fe/Al (9.8 kg) demonstrated the capability of bimetallic Fe/Al for COD removal of acidic dye solutions. The novelty of bimetallic Fe/Al is that it is an all-in-one solid-phase Fenton reagent that can be readily applied to a wide variety of environmental applications.