Related Experiment Video
Updated: Jan 26, 2026

Author Spotlight: Unraveling the Mysteries of Terrestrial Anaerobic Microorganisms in Uncharted Environments by In Situ Culturing
Published on: January 12, 2024
Disinfection of anaerobic/aerobic sanitary effluent using ozone: Formaldehyde formation
Nathalie Dyane Miranda Slompo1, Gustavo Henrique Ribeiro da Silva2
1Department of Hydraulics and Sanitation, University of São Paulo (EESC-USP), São Carlos, SP, Brazil.
Abstract:
The scarcity of natural resources supports the perspective of reusing treated effluents, mainly in agriculture, where the reduction in the demand of drinking water and the provision of alternative sources for nutrients are important. However, the process of disinfection, essential to the protection of human health, generates deleterious by-products to both humans and the environment. This research aimed to evaluate the use of ozone as a disinfectant for wastewater treated by anaerobic/aerobic baffled reactor for later agricultural reuse. Disinfection tests were conducted by applying ozone, in batch, with applied dosages of 5, 8, and 10 mg O3 /L and contact time of 7 min. All the tests led to formaldehyde formation, therefore within the standard suggested by the World Health Organization. For the indicators total coliforms and Escherichia coli, the ozone was considered effective, satisfying the criteria for agricultural reuse according to the World Health Organization of a dosage of 8 mg O3 /L. PRACTITIONER POINTS: Proposal of decentralized system (anaerobic/aerobic baffled reactor + ozone disinfection) for effluent treatment for agricultural reuse. Formation of formaldehyde dependent on applied ozone dose. Demand of ozone consumed preferentially for the formation of by-products, with low removal of COD. High formaldehyde formation (high ozone demand) can impair the inactivation of pathogens. System promotes effluent that meets the standards established by the World Health Organization (WHO) for agricultural reuse.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Formation of Species
Solution Formation
This selective...
Standard Enthalpy of Formation
Formation of Complex Ions
Microtubule Formation

