Related Experiment Video
Updated: Jan 25, 2026

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Spatial distribution, source identification, and potential risk assessment of toxic contaminants in surface waters
Jing Liu1,2, Yongjun Liu3, Aining Zhang1
1Key Laboratory of Northwest Water Resource, Ecology and Environment, Ministry of Education, Xi'an University of Architecture and Technology, No. 13 Yanta Road, Xi'an, 710055, China.
Abstract:
The Yulin Energy and Chemical Industry Base is widely known for its rich mineral resources and multiple types of fossil-fuel-based chemical industries; nevertheless, information regarding the level of toxic contaminants in the surface waters is lacking in this area. Therefore, this study investigates the distributions, sources, and risks of various toxic contaminants, including heavy metals, organochlorine pesticides (OCPs), and polycyclic aromatic hydrocarbons (PAHs), from 35 sampling sites in eight rivers. The ΣHCH concentration ranged from 1.28 to 6.64 ng/L with predominant β-HCH, and the ΣDDT concentration was less than 0.35 ng/L. The OCPs were derived from the recent input of lindane, residual technical-grade HCHs, and DDTs. The soil type can affect the environmental fate of DDT, and p,p'-DDE was widespread in the sandy land and loess areas. p,p'-DDD was rarely detected in the Mu Us Sandy Land area. The calculated ratios of isomers indicated that petroleum was the major source of PAHs. OCP and PAH contamination in the surface waters posed potential risks at several sampling sites. Due to the impacts by industrial emissions, agricultural sources, and vehicular traffic, the distribution of contaminant concentrations in the surface waters exhibited a significant spatial relationship with the land use pattern in the study region according to the results of principal component analysis and cluster analysis.
Related Concept Videos
Water and Mineral Acquisition
Contaminants and Errors
Another key consideration is determining the appropriate number of samples required to...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
The Water Cycle
Relative Risk
Drug Distribution: Volume of Distribution

