Related Experiment Video
Updated: Jan 25, 2026
Cortical Source Analysis of High-Density EEG Recordings in Children
Published on: June 30, 2014
Source contribution analysis of mercury deposition using an enhanced CALPUFF-Hg in the central Pearl River Delta,
1Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, College of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Center, Guangzhou, 510006, China.
Abstract:
Atmospheric mercury (Hg) poses human health and ecological risks once deposited and bio-accumulated through food chains. Source contribution analysis of Hg deposition is essential to formulating emission control strategies to alleviate the adverse impact of Hg release from anthropogenic sources. In this study, a Hg version of California Puff Dispersion Modeling (denoted as CALPUFF-Hg) system with added Hg environmental processes was implemented to simulate the Hg concentration and deposition in the central region of the Pearl River Delta (cPRD) at 1 km × 1 km resolution. The contributions of eight source sectors to Hg deposition were evaluated. Model results indicated that the emission from cement production was the largest contributor to Hg deposition, accounting for 13.0%, followed by coal-fired power plants (6.5%), non-ferrous metal smelting (5.4%), iron and steel production (3.5%), and municipal solid waste incineration (3.4%). The point sources that released a higher fraction of gaseous oxidized mercury, such as cement production and municipal solid waste incineration, were the most significant contributors to local deposition. In this intensive industrialized region, large point sources contributed 67-94% of total Hg deposition of 6 receptors which were the nearest grid-cells from top five Hg emitters of the domain and the largest municipal solid waste incinerator in Guangzhou. Based on the source apportionment results, cement production and the rapidly growing municipal solid waste incineration are identified as priority sectors for Hg emission control in the cPRD region.
Related Concept Videos
01:17The Delta-to-Delta Circuit
01:10Central Tendency: Analysis
The mean is one such measure, calculated by totaling all values in a dataset and dividing by the number of values. For instance, the mean blood pressure reading (120, 130, 140, 150) would be 135. However, the mean can be affected by extreme values or outliers.
The median, another measure,...
01:19The Y-to-Delta Circuit
The initial step in analyzing a wye-to-delta circuit is to assume a positive phase sequence. These phase voltages are then utilized to calculate the line voltages that occur directly across the delta-connected load impedances. Van, Vbn, and Vcn are the phase voltages in wye, and Vab, Vbc, and Vca are the line voltages for a delta circuit. The relation between...
01:16The Delta-to-Y Circuit
01:10Mesh Analysis with Current Sources
Current Source in One Mesh: The analysis process is straightforward when a current source is found in only one mesh within the circuit. Mesh currents are assigned as usual, with the mesh containing the current source excluded from the analysis. Kirchhoff's voltage law...
01:11Nodal Analysis with Voltage Sources
Consider a circuit that contains four resistors and two voltage sources, as shown in Figure 1. One of these voltage sources is connected between a...