Related Experiment Video
Updated: Jan 24, 2026

A Protocol for Conducting Rainfall Simulation to Study Soil Runoff
Published on: April 3, 2014
Experimental study for effects of terrain features and rainfall intensity on infiltration rate of modelled permeable
Jingming Hou1, Yangwei Zhang1, Yu Tong1
1State Key Laboratory of Eco-hydraulics in Northwest Arid Region of China, Xi'an University of Technology, Xi'an, 710048, China.
Abstract:
In order to investigate the effects of the terrain slopes and rainfall intensity on the steady infiltration rate of permeable pavement, an experiment with the combinations of three types of permeability, three kinds of rainfall intensity, different cross slope and longitudinal slope are undertaken. Through analyzing the experimental data, it is indicated that: (1) the relation between the steady infiltration rate and the cross and longitudinal slopes can be described by power functions, i.e. as the slopes increase, the steady infiltration rate decreases. The steady infiltration rate can be reduced by 23.3%-72.2% and 12.6%-22.2% for the slopes ranging from 0° to 5° and from 5° to 10°, respectively, illustrating the infiltration is more sensitive to the 0°-5° slope; (2) Under the same conditions, the effect of the cross slope on the steady infiltration rate is about 1.1-1.4 times as high as that of the longitudinal slope, i.e. the cross slope varying could lead to more obvious infiltration change, comparing to the longitudinal slope; (3) The relation between the rainfall intensity and the infiltration rate can be reflected by power function as well. The higher the rainfall intensity, the more the steady infiltration rate increases; (4) The comprehensive effect of the cross slope, longitudinal slope and rainfall intensity on steady infiltration rate can be expressed by quadratic polynomial functions. The main purpose of the manuscript is to determine how the slopes and the rainfall intensities affect the infiltration process and guide the plan and design of the permeable pavement in practical engineering.
Related Concept Videos
Design Example: Joints in Concrete Pavements
Contraction joints are typically formed by sawing a groove into the concrete shortly after it has hardened. This creates a weakened vertical plane, deliberately encouraging cracking at...
Measuring Reaction Rates
Permeability of Concrete
Sound Intensity
Reaction Rate
The mathematical representation of the change in the concentration of reactants and products, over time, is the rate...
Rate-Determining Steps
In a multistep reaction mechanism, one of the elementary steps progresses significantly slower than the others. This slowest step is called the rate-limiting step (or rate-determining step). A reaction cannot proceed faster than its slowest step, and hence, the rate-determining step limits the overall reaction rate.
The concept of rate-determining step can be understood from the analogy of a 4-lane freeway with a short-stretch of traffic-bottleneck caused due to...

