Related Experiment Video
Updated: Jan 24, 2026

Prevention of Heat Stress Adverse Effects in Rats by Bacillus subtilis Strain
Published on: July 11, 2016
Characterization and bioleaching of nickel laterite ore using Bacillus subtilis strain
Ellen C Giese1, Hannah L Carpen1, Luiz C Bertolino1
1Center for Mineral Technology (CETEM), Rio de Janeiro, Brazil.
Abstract:
There are two principal types of nickel (Ni) deposits: sulfide and laterite ores. Interest in low-grade Ni-laterite ores has increased in recent years as high-grade Ni-sulfide deposits are being quickly depleted. However, processing of Ni laterites has proven technically difficult and costly, and the development of alternative low-cost biotechnologies for Ni solubilization has been encouraged. In this context, by the first time, a sample of Brazilian Ni-laterite ore was analyzed mineralogically and subjected to bioleaching tests using a heterotrophic Bacillus subtilis strain. SEM-analysis indicated that the primary Ni carrier mineral is goethite. Chemical analysis of different grain size fractions indicated a homogeneous distribution of Ni. XRF-analysis showed that the ore consists mainly in lizardite (32.6% MgO) and contains1.0% NiO (0.85% Ni). Bioleaching batch experiments demonstrated that about 8.1% Ni (0.7 mg Ni/g ore) were solubilized by the B. subtilis after 7 days. Application of microwave heating as a Ni-laterite pretreatment was also tested. This pretreatment increased the bioextraction of Ni from 8% to 26% (2.3 mg Ni g-1 ore).
Related Concept Videos
Thermal Strain
Shearing Strain
Measurements of Strain
Strain Energy
Consider a rod that is fixed at one end and subjected to an axial force at the free end. This axial force induces stress within the rod, leading to its elongation. As the axial force increases, so does the elongation of the rod, illustrating a direct relationship between the force applied and the resulting...
Stress-Strain Diagram
Transformation of Plane Strain
Under plane strain conditions, typical for members where one dimension significantly exceeds the others, deformations and resultant strains are...

