Related Experiment Video
Updated: Jan 23, 2026

Evaluating Plasmonic Transport in Current-carrying Silver Nanowires
Published on: December 11, 2013
Plasmon enhanced light scattering into semiconductors by aperiodic metal nanowire arrays
Abstract:
Light scattering from nanostructures is an essential ingredient in several optical technologies, and experimental verification of simulations of light scattering is important. In particular, solar cells may benefit from light-trapping due to scattering. However, light that is successfully trapped in an absorbing media such as e.g. Si necessarily escapes direct detection. We present in this paper a technique for direct measurement and analysis of light scattering from nanostructures on a surface, exemplified with aperiodic patterns of Ag strips placed on a GaAs substrate. By placing the structures on the flat face of a half-cylinder, the angular distribution of light scattered into the azimuth plane can be directly detected, including directions above the critical angle that would be captured if the substrate had the form of a slab. Modelling of the scattered light by summing up contributions from each strip agrees with the experimental results to a very detailed level, both for scattering backward and into the substrate.
Related Concept Videos
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Types of Semiconductors
Bonding in Metals
Metallic Solids
All metallic solids exhibit high thermal and electrical conductivity, metallic luster, and malleability....

