Nonfocal transient neurological attacks in patients with carotid artery occlusion

Eline A Oudeman1,2, Eline J Volkers1,3, Jacoba P Greving3

  • 1Department of Neurology and Neurosurgery, Brain Centre Rudolf Magnus, University Medical Centre Utrecht, Utrecht University, Utrecht, the Netherlands.

Abstract

Related Concept Videos

Acid Attack on Concrete01:21

Acid Attack on Concrete

When acids come into contact with concrete, they initiate a chemical reaction that dissolves the hydrated cement paste. This process leads to softening and structural weakening of the concrete. This issue is commonly observed in environments such as chimneys, sewers, and industrial settings. The severity of the damage increases as the pH of the water interacting with the concrete drops below 6.5. In particular, a pH under 4.5 can cause significant concrete damage.
The rate at which hydrogen...
726
Sulfate Attack on Concrete01:29

Sulfate Attack on Concrete

Sulfate attack on concrete is a deterioration process characterized by a whitish discoloration beginning at the edges and corners, accompanied by cracking and spalling. This phenomenon occurs when sulfates react with the components of hardened concrete, forming compounds like calcium sulfate and calcium sulfoaluminate which occupy more space than the substances they replace, causing the concrete to expand and disrupt.
Sulfates from sources like soil, groundwater, or industrial effluents...
715
Series R—L Circuit Transients01:22

Series R—L Circuit Transients

In a series resistor-inductor (R-L) circuit, closing the switch at the start of the time period simulates a three-phase short circuit, a fault condition where all three phases of an unloaded synchronous machine are short-circuited. When there is no fault impedance and no initial current, the initial voltage is determined by the phase angle of the source voltage.
Using Kirchhoff's Voltage Law (KVL) to analyze this circuit helps determine the total asymmetrical fault current, which consists...
386
Transient and Steady-state Response01:24

Transient and Steady-state Response

In control systems, test signals are essential for evaluating performance under various conditions. The ramp function is effective for systems undergoing gradual changes, while the step function is suitable for assessing systems facing sudden disturbances. For systems subjected to shock inputs, the impulse function is the most appropriate test signal.
These test signals are integral in designing control systems to exhibit two key performance aspects: transient response and steady-state...
521
Arteries and Arterioles01:16

Arteries and Arterioles

Arteries, the vasculature responsible for transporting blood from the heart, possess robust walls capable of enduring the elevated pressures exerted by the heartbeat. Arteries near the heart are especially thick-walled and enriched with elastic fibers across their three tunics, classifying them as elastic or conducting arteries. These arteries, usually with a diameter exceeding 10 mm, are characterized by their ability to dilate in response to the blood pumped from the heart's ventricles...
6.4K
Arteries of Lower Limbs01:20

Arteries of Lower Limbs

The external iliac artery transitions out of the body cavity, entering the femoral region of the lower leg, and is renamed the femoral artery at the point where it traverses the body wall. This artery is responsible for the distribution of blood to the thigh's deep muscles and the skin's ventral and lateral regions, achieved through several minor branches and the lateral deep femoral artery, which also spawns a lateral circumflex artery. The knee area receives blood from the genicular...
4.4K