Related Experiment Video
Updated: Jan 23, 2026

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Optimized anti-biofouling performance of bactericides/cellulose nanocrystals composites modified PVDF ultrafiltration
Guoquan Zhang1, Jinling Lv1, Fenglin Yang2
1Key Laboratory of Industrial Ecology and Environmental Engineering, Ministry of Education, School of Environmental Science and Technology, Dalian University of Technology, Dalian 116023, China E-mail: guoquanz@126.com; The first two authors contributed equally to this work.
Abstract:
The covalently functionalized cellulose nanocrystal (CNC) composites were synthesized by bonding common bactericides, such as dodecyl dimethyl benzyl ammonium chloride (DDBAC), ZnO and graphene oxide (GO) nanosheets, onto the CNC's surface. Then, the DDBAC/CNC, ZnO/CNC and GO/CNC nanocomposites modified polyvinylidene fluoride (PVDF) ultrafiltration membranes were fabricated by a simple one-step non-solvent induced phase separation (NIPS) process. The resultant hybrid membranes possessed porous and rough surfaces with more finger-like macropores that even extended through the entire cross-section. The hydrophilicity, permeability, antibacterial and antifouling performance and mechanism of the hybrid ultrafiltration membranes were evaluated and compared in detail, aiming at screening a superior hybrid membrane for practical application in micro-polluted source water purification. Among these newly-developed hybrid membranes, GO/CNC/PVDF exhibited an enhanced perm-selectivity with a water flux of 230 L/(m2 h bar) and humic acid rejection of 92%, the improved antibacterial activity (bacteriostasis rate of 93%) and antifouling performance (flux recovery rate (FRR) of >90%) being due to the optimized pore structure, higher surface roughness, incremental hydrophilicity and electronegativity. A lower biofouling level after three weeks' filtration of the actual micro-polluted source water further demonstrated that embedding the hydrophilic and antibacterial GO/CNC nanocomposite into the polymer matrix is an effective strategy to improve membrane anti-biofouling ability.
More Related Videos
Related Concept Videos
Sources of Self-Esteem II: Performance Feedback
Detergent Purification of Membrane Proteins
Classifying Matter by Composition
According to its composition, the matter can be classified into two broad categories — pure substances and mixtures.
A pure substance is a form of matter that has a constant composition throughout with uniform properties. For example, any sample of sucrose has the same composition and same physical properties, such as melting point, color, and sweetness, regardless of the source from which it is isolated.
A mixture is composed of two or...
Cellulose and Pectic Polysaccharides
As a cell matures, its cell wall specializes according to its type. For example, the...
The Water Cycle
Water and Mineral Acquisition

