Output-Feedback Cooperative Formation Maneuvering of Autonomous Surface Vehicles With Connectivity Preservation and...

In this paper, a cooperative time-varying formation maneuvering problem with connectivity preservation and collision avoidance is investigated for a fleet of autonomous surface vehicles (ASVs) with position-heading measurements. Each vehicle is subject to unknown kinetics induced by internal model uncertainty and external disturbances. At first, a nonlinear state observer is used to recover the unmeasured linear velocity and yaw rate as well as unknown uncertainty and disturbances. Then, observer-based cooperative time-varying formation maneuvering control laws are designed based on artificial potential functions, nonlinear tracking differentiators, and a backstepping technique. The stability of closed-loop distributed formation control system is analyzed based on input-to-state stability and cascade stability. The salient features of the proposed method are as follows. First, cooperative time-varying formation maneuvering with the capability of connectivity preservation and collision avoidance can be achieved in the absence of velocity measurements. Second, the complexity of the cooperative time-varying formation maneuvering control laws is reduced without resorting to dynamic surface control. Third, the uncertainty and disturbance are actively rejected in the presence of position-heading measurements. Simulation results are given to substantiate the proposed output feedback control method for cooperative time-varying formation maneuvering of ASVs with connectivity preservation and collision avoidance.