Cadmium adsorption characteristics of biochars derived using various pine tree residues and pyrolysis temperatures

This study investigated the characteristics of biochars derived using various pine tree residues and pyrolysis temperatures and evaluated their Cd adsorption behaviors. The characteristics of pine tree residue biochars (PRBs) were dominantly affected by the pyrolysis temperature, and the optimum pyrolysis temperature for Cd adsorption was 600 °C. The adsorption of Cd by PRBs was divided into two stages: rapid adsorption on the initial boundary layer and slow adsorption by intraparticle diffusion. The Cd adsorption characteristics of all the PRBs were well described by pseudo-second-order and Langmuir isotherm models, and the maximum adsorption capacity was the highest in pine bark biochar (85.8 mg/g). The amounts of the cations released from the mixed pine tree residue biochars (M-PRBs) during Cd adsorption were increased, while the amount of phosphate released was decreased, indicating that exchangeable cations and phosphate on the biochar affected the Cd adsorption. In particular, the amount of Cd removed by the exchangeable cations corresponds to 23.6% of the total adsorption amount. Spectroscopic analyses using FTIR showed that the Cd adsorption on M-PRB was associated with functional groups such as CC, COH and COOH. Overall, the use of biochars derived from pine tree residue as an adsorbent is considered to be effective for both the treatment of wastewater containing heavy metals and the recycling of forest residues.