Related Experiment Video
Updated: Jan 23, 2026

Solid-state Graft Copolymer Electrolytes for Lithium Battery Applications
Published on: August 12, 2013
Self-Supported and Flexible Sulfur Cathode Enabled via Synergistic Confinement for High-Energy-Density Lithium-Sulfur
Zhuosen Wang1, Jiadong Shen1, Jun Liu1,2
1Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, P. R. China.
Abstract:
Lithium-sulfur (Li-S) batteries have attracted much attention in the field of electrochemical energy storage due to their high energy density and low cost. However, the "shuttle effect" of the sulfur cathode, resulting in poor cyclic performance, is a big barrier for the development of Li-S batteries. Herein, a novel sulfur cathode integrating sulfur, flexible carbon cloth, and metal-organic framework (MOF)-derived N-doped carbon nanoarrays with embedded CoP (CC@CoP/C) is designed. These unique flexible nanoarrays with embedded polar CoP nanoparticles not only offer enough voids for volume expansion to maintain the structural stability during the electrochemical process, but also promote the physical encapsulation and chemical entrapment of all sulfur species. Such designed CC@CoP/C cathodes with synergistic confinement (physical adsorption and chemical interactions) for soluble intermediate lithium polysulfides possess high sulfur loadings (as high as 4.17 mg cm-2 ) and exhibit large specific capacities at different C-rates. Specially, an outstanding long-term cycling performance can be reached. For example, an ultralow decay of 0.016% per cycle during the whole 600 cycles at a high current density of 2C is displayed. The current work provides a promising design strategy for high-energy-density Li-S batteries.
Related Concept Videos
The Sulfur Cycle
Batteries and Fuel Cells
Sulfur Assimilation
Chirality at Nitrogen, Phosphorus, and Sulfur
A consequence of chirality is the need for enantiomeric resolution. While this is theoretically possible for all...
Internal Energy
Strain-Energy Density
In the elastic region of a material, the relationship between the stress and the strain is linear and follows Hooke's Law. The strain energy density in this region...

