Related Experiment Video
Updated: Jan 23, 2026

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Improving ultrafiltration membrane performance with pre-deposited carbon nanotubes/nanofibers layers for drinking
Xiaoxiang Cheng1, Weiwei Zhou2, Peijie Li3
1School of Municipal and Environmental Engineering, Shandong Jianzhu University, Jinan, 250101, PR China; Shandong Co-Innovation Center of Green Building, Jinan, 250101, PR China.
Abstract:
To efficiently improve the performance of ultrafiltration (UF) membrane for drinking water treatment, carbon nanotubes (CNTs) and carbon nanofibers (CNFs) were utilized as pre-deposited coating layers on membrane surface. A comparative study between these two carbon nanomaterials for enhancing pollutants removal and mitigating membrane fouling induced by natural organic matter (NOM) was carried out. The surface morphologies were characterized by scanning electron microscopy, and the results indicated that the CNTs coating layer was more dense and homogeneous with a smaller pore size than that of CNFs. The removal and antifouling performance of CNTs/CNFs coated membranes were investigated with typical NOM, i.e., humic acid, bovine serum albumin, sodium alginate, as well as natural surface water. The results showed that the presence of coating layers was very effective to improve the rejection rate of NOM, among which CNTs exhibited significant better performance than CNFs. The fouling control performance was influenced by the NOM fraction and coating mass (6-50 g/m2). Generally, CNTs coating layer was more efficient in alleviating both reversible and irreversible membrane fouling, while CNFs exhibited limited effect on irreversible fouling control. Both pre-adsorption and size exclusion contributed to the rejection of membrane foulants, thus reducing the organics directly contacted with the underlying membrane. In natural surface water treatment, the pre-deposited coating layers significantly delayed the transition of fouling mechanisms from pore blocking to cake filtration. The experimental results were expected to illustrate the feasibility of pre-deposited CNTs/CNFs layers for enhancing membrane performance during drinking water treatment.
Related Concept Videos
Water and Mineral Acquisition
The Carbon Cycle
Phase Transitions: Sublimation and Deposition
States of Water
Water freezes when the intermolecular forces are greater than the kinetic energy. Unlike most other substances, water is less dense in its solid state than in its liquid state. This is because each water molecule can form...
Carbon Skeletons
pre-mRNA Processing
Once about 20-40 ribonucleotides have been joined together by RNA polymerase, a group of enzymes adds a “cap” to the 5’ end of the growing transcript. In this process, a 5’ phosphate is replaced by modified guanosine that has a methyl group attached to it (7-Methyl...

