A high temporal-spatial emission inventory and updated emission factors for coal-fired power plants in Shanghai,...

With the implementation of the ultra-low emission policy in China, emission factors (EFs) of power plant pollutants are constantly changing. Emission inventories developed using the recommended EFs contain high levels of uncertainty and it is difficult to achieve a high temporal resolution. Detailed sulfur dioxide (SO₂), nitrogen oxides (NOx), and particulate matter (PM) emission data based on a continuous emission monitoring system (CEMS) were obtained from 33 units at 13 power plants in Shanghai in 2017. The data were used to develop an hourly unit-based emission inventory and to devise updated EFs for coal-fired power plants. Emissions of SO₂, NOx, and PM typically met the ultra-low emission limit, with total emissions of SO₂, NOx, and PM of 2895.0, 5348.3, and 503.8 tons, respectively. Emission proportions of SO₂ and NOx for 300-600, 600-1000, and above 1000 MW units were similar, while the emission proportion of PM decreased with an increase in unit capacity. Emissions of SO₂, NOx, and PM displayed similar monthly variations, peaking in winter and summer. Diurnal hourly variations of SO₂, NOx, and PM emissions displayed a bimodal trend, with higher emissions at night on weekends than on weekdays. EFs based on CEMS (EF_C) of SO₂, NOx, and PM were 0.10, 0.36, and 0.04 g kg^-1 of coal, respectively, which were one or two orders of magnitude lower than the widely-used EFs and 4-30 times lower than EFs based on the mass balance approach. After replacing the recommended fixed decontamination efficiencies with individually fitted values, the calculated EFs were consistent with the corresponding EF_C and discrepancies were further reduced. The new inventory and updated EFs will enable a better understanding of the temporal variations of power plant emissions and reduce the uncertainty caused by the overestimation of EFs after the implementation of ultra-low emissions technology.