Post-treatment of bio-treated acrylonitrile wastewater using UV/Fenton process: degradation kinetics of target...

In this study, post-treatment of bio-treated acrylonitrile wastewater was performed using the UV/Fenton process. Five target compounds (furmaronitrile, 3-pyridinecarbonitrile, 1,3-dicyanobenzene, 5-methyl-1H-benzotriazole, and 7-azaindole) were selected as target compounds and their degradation kinetics were examined. Under optimal reaction conditions (H₂O₂ dosage 3.0 mM, Fe²⁺ dosage 0.3 mM, and initial pH 3.0), more than 85% of total organic carbon (TOC) was eliminated in 30 min when a 10-W UV lamp was employed, and the electrical energy per order of magnitude for TOC removal was as low as 2.96 kWh m^-3. Furthermore, the target compounds and the toxicity were largely removed from the bio-treated effluent. Size exclusion chromatography with organic carbon detector analysis revealed that organic components with a wide range of molecular weights were greatly reduced after the UV/Fenton process. A simplified pseudo steady-state (SPSS) model was applied to predict the degradation of target compounds during the UV/Fenton process. The concentrations of generated hydroxyl radicals were estimated to be 3.06 × 10^-12 M, 6.37 × 10^-12 M, and 10.9 × 10^-12 M under 5-, 10-, and 15-W UV lamps, respectively. These results demonstrate that the proposed SPSS model fitted well with experimental data on the post-treatment of real wastewater, and consequently indicate that this model can be a useful tool in the prediction of degradation of target compounds during the UV/Fenton process.