Online Conductimetric Flow-Through Analyzer Based on Membrane Diffusion for Ammonia Control in Wastewater Treatment...

Ammonia is a necessary monitoring parameter that should be controlled within an optimum range in the whole process of wastewater treatment and recycling, but few reliable real-time monitoring technologies are available currently under such harsh water conditions. This study proposes a continuous conductometric flow-through analyzer for ammonia monitoring (CFAA) in the wastewater treatment process. It is developed based on the gas diffusion mechanisms, and the proposed analytical principle has been validated in which the real-time conductivity increment rate is linearly proportional to the real-time ammonia concentration in the sample. This method could be generally applicable in monitoring a wide ammonia concentration range (10.2 μg L^-1 to 500 mg L^-1), and it is capable of achieving long-term ammonia monitoring by periodic renewal of the receiving solution. The potential impact factors and corresponding calibration principles are also developed to avoid tedious ongoing calibration. The field application results demonstrate that CFAA can effectively and directly achieve real-time and average ammoniacal nitrogen monitoring at different treatment stages regardless of the complexity of wastewater, not requiring any sample pretreatment. Compared with other ammonia online monitoring technologies, the proposed CFAA shows remarkable advantages in high reliability, durability, and accuracy, especially under severe monitoring condition. It can be a useful monitoring tool for continuous ammonia control in the wastewater treatment process.