Selective Separation of Pd(II) on Pyridine-Functionalized Graphene Oxide Prepared by Radiation-Induced Simultaneous...

The recovery of precious metals like palladium (Pd) from secondary resources has enormous economic benefits and is in favor of resource reuse. In this work, we prepared a high efficiency pyridine-functionalized reduced graphene oxide (rGO) adsorbent for selective separation of Pd(II) from simulated electronic waste leachate, by one-pot γ-ray radiation-induced simultaneous grafting polymerization (RIGP) of 4-vinylpyridine (4VP) from graphene oxide (GO) and reduction of GO. The poly(4-vinylpyridine)-grafted reduced graphene oxide (rGO-g-P4VP) exhibits fast adsorption kinetics and high maximum adsorption capacity. The adsorption capacity is 105 mg g^-1 in the first minute and reaches equilibrium within 120 min. The adsorption process follows the Langmuir model, from which the maximum adsorption capacity of Pd(II) is estimated to be 177 mg g^-1. We also proved that the adsorption mechanism of Pd(II) on rGO-g-P4VP involves both ion exchange and coordination adsorption by XPS analysis. Most importantly, the loss of oxygen-containing groups due to reduction of GO not only facilitates the separation of adsorbent from aqueous solution but also reduces the electrostatic repulsion toward Pd(II)Cl₄^2- in hydrochloric acid solution, leading to a higher adsorption selectivity of Pd(II) over some common metal cations in electronic waste including Fe(III), Cu(II), and Al(III) compared with poly(4-vinylpyridine)-grafted graphene oxide (GO-g-P4VP) prepared by atom transfer radical polymerization. Other precious metals like Pt(IV) and Au(III) can also be recovered easily and selectively by rGO-g-P4VP. This work demonstrates that rGO-g-P4VP prepared by the facile RIGP is a promising adsorbent for recovery of precious metals from secondary resources like electronic waste leachate.