Related Experiment Video
Updated: Jan 22, 2026
Design and Use of a Full Flow Sampling System FFS for the Quantification of Methane Emissions
Published on: June 12, 2016
Polyhydroxyalkanoates production from methane emissions in Sphagnum mosses: Assessing the effect of temperature and
Rebeca Pérez1, Jesús Casal2, Raúl Muñoz1
1Department of Chemical Engineering and Environmental Technology, School of Industrial Engineering, Valladolid University, Prado de la Magdalena, 5, Valladolid, Spain; Institute of Sustainable Processes, Valladolid University, Spain.
Abstract:
The isolation of highly efficient methanotrophic communities is crucial for the optimization of methane bioconversion into products with a high market value such as polyhydroxyalkanoates (PHA). The research here presented aimed at enriching a methanotrophic consortium from two different inocula (Sphagnum peat moss (Sp) and Sphagnum and activated sludge (M)) able to accumulate PHA while efficiently oxidizing CH4. Moreover, the effect of the temperature and phosphorus limitation on the biodegradation rate of CH4 and the PHA accumulation potential was investigated. Higher CH4 degradation rates were obtained under P availability at increasing temperature (25, 30 and 37 °C). The biomass enriched from the mixed inoculum always exhibited a superior biodegradation performance regardless of the temperature (a maximum value of 84.3 ± 8.4 mg CH4 h-1 g biomass-1 was recorded at 37 °C). The results of the PHB production showed that phosphorus limitation is required to promote PHB accumulation, the highest PHB content being observed with the Sphagnum inoculum at 25 °C (13.6 ± 5.6%). The differential specialization of the microbial communities depending on the enrichment temperature supported the key role of this parameter on the results obtained. In all cases after the completion of the enrichment process and of the P limitation tests, Methylocystis, a type II methanotroph known for its ability to accumulate PHA, was the genus that became dominant (reaching percentages from 16 to 46% depending on the enrichment temperature). Thus, the results here obtained demonstrated for the first time the relevance of the temperature used for the enrichment of the methanotrophic bacteria to boost PHA production yields under P limiting condition, highlighting the importance of optimizing culture conditions to improve the cost-efficiency of bioprocesses based on using methane as the primary feedstock for the PHA industrial market.
Related Concept Videos
02:27Limiting Reactant
01:21The Phosphorus Cycle
02:19Le Chatelier's Principle: Changing Temperature
To understand this phenomenon, consider the elementary reaction:
01:14Assessing Body Temperature - Oral
Step 1:
Start by practicing proper hand hygiene to prevent the spread of microorganisms.
Step 2:
Take the thermometer out of the charging unit, switch it on, and wait for the ready sign.
Step 3:
Gently slide the probe cover until a click is heard. This simple action prevents cross-contamination and ensures the correct placement of the probe cover.
Step 4:
Instruct the patient to open their mouth and place...
01:14Assessing Body Temperature - Axilla
Step 1: Perform hand hygiene and put on clean gloves to maintain infection control and prevent cross-contamination.
Step 2: Prepare the patient by explaining the procedure to ensure understanding and cooperation. Ensure privacy, expose the axilla, and inform the patient that minimal movement is crucial for an accurate reading.
Step 3: Adjust the patient’s clothing to expose only the axilla. It minimizes...
02:39Emission Spectra