A Novel Universal Approach for Temperature Correction on Frequency Domain Spectroscopy Curve of Transformer Polymer...

It is a fact that the frequency domain spectroscopy (FDS) curve at different temperatures can be corrected by the shift factor (α_T) extracted from the master curve. However, the α_T and master curve reported by previous works are distinctive due to the difference in the construction algorithm. Therefore, it is of great significance to report a universal approach for extracting α_T. In this work, the unaged oil-immersed pressboards with different moisture content (mc%) are firstly prepared and selected as the research specimen. Then, the α_T of FDS curves on the above pressboard is extracted based upon the master curve technique. The influence mechanism under the various test temperature (T) and mc% is therefore analyzed so as to establish a universal model for predicting the α_T. The present findings reveal that the α_T value extracted from FDS curves is both temperature-dependent and moisture-dependent. In addition, the predicted α_T is not only suitable for temperature correction on FDS curve of same type pressboard with different insulation conditions (moisture contents and aging degrees), but also maintains considerable accuracy when applied to different types of pressboard. Therefore, the obtained conclusions will provide a universal method for temperature correction on FDS curve of transformer polymer insulation.