Application of the IQQA-3D imaging interpretation and analysis system in uniportal video-assisted thoracoscopic

Guobing Xu1, Chun Chen1, Wei Zheng1

  • 1Department of Thoracic Surgery, Fujian Medical University Union Hospital, Fuzhou 350001, China.

Abstract

Related Concept Videos

Resistors In Series01:10

Resistors In Series

A resistor is an ohmic device that limits the flow of charge in a circuit. Most circuits have more than one resistor. If several resistors are connected together and connected to a battery, the current supplied by the battery depends on the equivalent resistance of the circuit. The equivalent resistance of a combination of resistors depends on both their individual values and how they are connected. The simplest combination of resistors is the series combination. 
In a series circuit, the...
6.1K
Interpreting R Charts01:22

Interpreting R Charts

R chart, or range chart, is a fundamental tool in statistical process control used to monitor the variability within a process. It complements the X-bar (x̄) chart by focusing on the range of the data, rather than individual values, providing a clear picture of the process dispersion over time.
An R chart plots the range of subsets of measurements collected from a process. Each point on the chart represents the range—defined as the difference between the maximum and minimum...
343
Series Resonance01:17

Series Resonance

The RLC circuit impedance is defined as the ratio of the supply voltage to the circuit current. Resonance in such a circuit occurs when the imaginary part of this impedance equals zero. This specific condition means that the inductive reactance is exactly equal to the capacitive reactance. The frequency at which this happens is known as the resonant frequency. Mathematically, the resonant frequency is inversely proportional to the square root of the product of the inductance (L) and capacitance...
772
Interpreting Run Charts01:25

Interpreting Run Charts

Run charts, essentially line graphs plotted over time, serve as fundamental yet effective tools for process analysis. They chronicle data sequentially, facilitating the identification of trends, shifts, or cyclical movements. This graphical representation is instrumental in determining whether a process is stable or exhibits signs of potential instability indicative of special cause variation. In the healthcare domain, run charts depict infection rates over time, enabling hospitals to monitor...
3.1K
Anatomical Positions01:11

Anatomical Positions

In anatomy, several standard anatomical positions are used as references for describing the position and orientation of different body parts. These positions help provide a common frame of reference when discussing anatomical structures. The anatomical position is the standard reference point for describing the body's position and orientation. In this position:
The body is upright, facing forward, and standing erect.
The feet are parallel and flat on the floor.
The arms are hanging by the...
19.5K
Anatomical Terminology01:20

Anatomical Terminology

Knowledge of anatomy is essential to understand human biology and medicine. Anatomists and health care professionals use standard terminology to describe the human body with more precision and no ambiguity. Anatomical terms have mostly Greek and Latin-derived roots. Because these languages are rarely used in conversation, the meaning of words remains the same. Each term is made up of a root in between the prefixes and suffixes. The root of a term often refers to an organ, tissue, or condition,...
26.6K