Related Experiment Video
Updated: Jan 22, 2026

Protocol for Relative Hydrodynamic Assessment of Tri-leaflet Polymer Valves
Published on: October 17, 2013
Physico-mechanical characteristics of tri-calcium silicate pastes as dentin substitute and interface analysis in
M M Radwan1, Shaymaa M Nagi2, H K Abd El-Hamid1
1Refractories, Ceramics and Building Materials Department, National Research Centre (NRC), Dokki, Cairo 12622, Egypt.
Abstract:
The influence of using simulated body fluid (SBF) as a curing medium on some characteristics of pure single tri-calcium silicate (C3S) bio-cement was investigated. CaCl2 salt solution was used as an accelerating liquid for setting and hardening of C3S pastes in comparison with distilled water (DW). Solid state reaction was applied to synthesis C3S phase at elevated temperature followed by rapid cooling. The results showed that 10 wt.% CaCl2 solution was the optimum concentration that showed the lowest setting time (106 min). C3S pastes prepared with CaCl2 solution have better physical and mechanical properties than those mixed with DW even after curing under SBF solution for the different curing ages. However, SBF solution has an adverse effect on the hydrated compound C-S-H that results in a little decrease in strength and hardness values. The elemental analysis emphasized the presence of apatite layer on the surface of the hardened C3S paste. Scanning electron microscopy (SEM) photomicrographs and elemental analysis revealed reliable adaptation of the experimentally prepared C3S paste to the tooth structure, in addition to its bioactivity makes it a consistent material to be used as dentin substitute.
More Related Videos
07:42Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
07:07Development of a Direct Pulp-capping Model for the Evaluation of Pulpal Wound Healing and Reparative Dentin Formation in Mice
Published on: January 12, 2017
Related Concept Videos
Mechanical Characteristics of Steel
The tension test is fundamental for determining tensile strength. In this test, a steel specimen is stretched using a gripping device until it breaks. The data collected during this test are used...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Antiarrhythmic Drugs: Class IV Agents as Calcium Channel Blockers
Verapamil, a calcium channel blocker, inhibits calcium movement across myocardial cell membranes and vascular smooth muscle. This results in the dilation of coronary and...
Weak Base Solutions
Weak Acid Solutions
Oral Cavity
Teeth: The teeth are the hardest structures in our bodies. Humans have two sets of teeth throughout their lifetime: deciduous (baby) teeth and permanent teeth. Each tooth consists of several parts: the crown (visible part), the root (embedded in the jaw), enamel (hard outer...