Related Experiment Video
Updated: Jan 22, 2026

Esophageal Heat Transfer for Patient Temperature Control and Targeted Temperature Management
Published on: November 21, 2017
Heat transfer intensification in an actuated heat exchanger submitted to an imposed pressure drop
Kevin Schmidmayer1, Prashant Kumar1, Pascal Lavieille2
1Aix-Marseille University, Marseille, France.
Abstract:
This paper is dedicated to the analysis of the improvement of heat transfer and the reduction of the pressure losses induced by the use of an active exchanger of millimeter size in a cooling loop. For pressure conditions imposed at the terminals of such a mini-channel whose upper wall is deformed by a progressive sinusoidal wave and for low Reynolds numbers (Re < 1000), we study the influence of the deformation parameters on the thermo-hydraulic performance of the exchanger (flow, heat transfer). The mechanical power applied to the deformed wall is connected to these parameters as well as to the pressure difference imposed by the external pump. The overall performance increases slightly with the value of the mechanical power up to a critical value for a given wall corrugation. Nevertheless, overall performance is up to 2 orders of magnitude higher than conventional static corrugated channels.
Related Concept Videos
Mechanisms of Heat Transfer I
Mechanisms of Heat Transfer II
Mechanism of heat transfer
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Quantifying Heat
Specific Heat
For example, increasing the temperature of one gram of water by 1°C requires one calorie of heat energy and can be written as 1 cal/g-°C, or...

