Effects of vibration on anammox-enriched biofilm in a high-loaded upflow reactor

An upflow biofilm reactor was operated for 211 days to investigate the effects of vibration on anammox treatment performance. With vibration, the highest nitrogen removal rates (20 kg-N·m^-3·d^-1) were obtained on day 180. Since the vibration could directly applied on the biofilm, it could release the dinitrogen gas accumulated in the biofilm timely and reduce the internal mass transfer resistance sharply. The specific anammox activity increased by more than 3 times with a higher vibration intensity. Meanwhile, the unique random motion caused by mechanical vibration promotes the production of extracellular proteins. Moreover, the VSS reached 20.97 g·L^-1 which was 1.6 times higher than the control reactor. Such enrichment method resulted in a hard and thick anammox biofilm with a special granular morphology, and the nitrite tolerance concentration could reach 500 mg-N·L^-1. Operated with an adequate vibration intensity could maintain the biofilm thickness and conducive to improve the stability of the reactor. In addition, this technique also allowed the microorganisms inside the biofilm and those on the surface to reach the same culture conditions. Base on the batch experiments, intermittent vibration caused a decrease in energy consumption from about 7.757 (kW·h)·(kg-N)^-1 in group 0-Lv7(60-60) to 0.912 (kW·h)·(kg-N)^-1 in group 0-Lv7(5-60). Compared to the internal recycle without vibration, the energy consumption fell by a slice over 65%. Furthermore, the high-throughput sequencing results showed that the relative abundance of Candidatus Kuenenia in reactor 1 increased from 13.2% to 43.9%.