Related Experiment Video
Updated: Jan 22, 2026
A Facile and Eco-friendly Route to Fabricate PolyLactic Acid Scaffolds with Graded Pore Size
Published on: October 17, 2016
An eco-friendly biorefinery strategy for xylooligosaccharides production from sugarcane bagasse using cellulosic
Xin Zhou1, Jianglin Zhao2, Xiaotong Zhang2
1Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, People's Republic of China; College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, People's Republic of China; Jiangsu Province Key Laboratory of Green Biomass-based Fuels and Chemicals, Nanjing 210037, People's Republic of China.
Abstract:
A novel approach was proposed for the production of xylooligosaccharides by direct pre-hydrolysis using gluconic acid as catalyst. Maximum xylooligosaccharides (degree of polymerization 2-6) yield of 53.2% could be obtained in 60 min through 5% gluconic acid hydrolysis of sugarcane bagasse at 150 °C. Furthermore, the yield of glucose from solids following gluconic acid hydrolysis treatment was 86.2% after fed-batch enzymatic hydrolysis with 10% solids loading. Results indicated that gluconic acid pretreatment combined with enzymatic hydrolysis could be successfully applied to sugarcane bagasse substrate. Subsequently, glucose could be efficiently bio-oxidized to gluconic acid by Gluconobacter oxydans ATCC 621H with 93.1% yield, and sugarcane bagasse derived gluconic acid has been proved to be an effective catalyst for xylooligosaccharides production. In this study, xylooligosaccharides production from sugarcane bagasse by gluconic acid hydrolysis demonstrated a great potential with respect to the production of these probiotics around the world.
More Related Videos
07:25Green and Low-cost Production of Thermally Stable and Carboxylated Cellulose Nanocrystals and Nanofibrils Using Highly Recyclable Dicarboxylic Acids
Published on: January 9, 2017
09:21Tuning the Acidity of Pt/ CNTs Catalysts for Hydrodeoxygenation of Diphenyl Ether
Published on: August 17, 2019
Related Concept Videos
01:01Production Efficiency
01:25Acidity and Basicity of Carboxylic Acid Derivatives
The relative acidic strength of the derivatives can be explained based on the extent of resonance stabilization of the conjugate base. The...
00:53Products of the Citric Acid Cycle
01:28Structures of Carboxylic Acid Derivatives
Carboxylic acid derivatives contain an acyl group attached to a heteroatom such as chlorine, oxygen, or nitrogen. The carbonyl carbon and oxygen are both sp2-hybridized with an unhybridized p orbital.
The three sp2 orbitals of the carbonyl carbon form three σ bonds, one each with the carbonyl oxygen, the α carbon, and the heteroatom, whereas the other two sp2 orbitals of the carbonyl oxygen are occupied by the lone pairs. Further, the unhybridized p...
01:26Spectroscopy of Carboxylic Acid Derivatives
01:16Nomenclature of Carboxylic Acid Derivatives: Acid Halides, Esters, and Acid Anhydrides
The IUPAC and common names of acid halides are derived from the corresponding carboxylic acids, by changing “ic acid” to “yl halide.” For example, as shown below, the IUPAC name ethanoyl chloride is derived from ethanoic acid, and the common name, acetyl chloride, is obtained from acetic acid.