Related Experiment Video
Updated: Jan 22, 2026

Fast Pyrolysis of Biomass Residues in a Twin-screw Mixing Reactor
Published on: September 9, 2016
Fast pyrolysis behaviors of cedar in an infrared-heated fixed-bed reactor
Jialong Zhu1, Lijun Jin1, Jiangang Li1
1State Key Laboratory of Fine Chemicals, Institute of Coal Chemical Engineering, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China.
Abstract:
To explore fast pyrolysis behaviors of cedar biomass, the infrared heating technique with quick heating rate was taken in a fixed-bed reactor. The effects of heating rates (5-30 °C/s) and pyrolysis temperatures (400-600 °C) on pyrolysis products distribution and compositions were discussed, and the reaction mechanism was proposed. The results show that high heating rate can significantly suppress secondary reaction of primary volatiles. GC/FID and GC/MS analyses indicate that higher heating rate is favorable to the generation of glucose derivatives such as acids and furans. However, higher temperature can obviously promote further conversion of guaiacyl-contained structure following demethylation, demethoxylation and H/CH3 assisted demethoxylation routes, which were proposed to interpret the formation of biphenolic hydroxyl and monophenolic hydroxyl compounds such as phenol, 2-methyl-phenol and 2,4-dimethyl-phenol, respectively. Moreover, the demethylation route exhibits obvious conversion advantage at higher temperature due to lower energy barrier.
Related Concept Videos
Capillary Beds
Capillaries connect arterioles, small branches of arteries, to venules,...
Specific Heat
For example, increasing the temperature of one gram of water by 1°C requires one calorie of heat energy and can be written as 1 cal/g-°C, or...
Fixed Action Patterns
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Quantifying Heat
Heat Flow and Specific Heat

