Related Experiment Video
Updated: Jan 22, 2026

Lipidico Injection Protocol for Serial Crystallography Measurements at the Australian Synchrotron
Published on: September 23, 2020
First measurements with a plastic scintillation dosimeter at the Australian MRI-LINAC
Levi Madden1,2, James Archer1, Enbang Li1,3
1Centre for Medical Radiation Physics, University of Wollongong, Wollongong NSW 2522, Australia.
Abstract:
MRI-LINACs combine MRI and LINAC technologies with the potential for image guided radiation therapy with optimal soft-tissue contrast. In this work, we present the advantages and limitations of plastic scintillation dosimeters (PSDs) for relative dosimetry with MRI-LINACs. PSDs possess many desirable qualities, including magnetic field insensitivity and irradiation angle independence, which are expected to make them suitable for dosimetry with MRI-LINACs. An in-house PSD was used to measure field size output factors as well as a percent depth dose distribution and the beam quality index TPR20/10 at a [Formula: see text] cm2 field size. Measurements were repeated with a Scanditronix/Wellhofer FC65-G ionisation chamber and PTW 60019 microDiamond detector for comparison. Relative differences were calculated between the three detectors, where the mean difference in dose was 1.2% between the PSD and ionisation chamber, 1.9% between the PSD and microDiamond detector and 1.3% between the microDiamond detector and the ionisation chamber. The closeness between the three mean differences in doses suggests that PSDs are feasible for relative dosimetry with MRI-LINACs.
More Related Videos
Related Concept Videos
Plasticizers
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
Plasticity
Plastic Behavior
Plastic Deformations
Plastic Deformations
Plastic Deformation in Circular Shafts

