Related Experiment Video
Updated: Jan 22, 2026

Author Spotlight: Metallic Nanocomposites to Eliminate Antibiotic-Resistant Bacteria
Published on: October 4, 2024
Boundary and Elastohydrodynamic Lubrication Behaviors of Nano-CuO/Reduced Graphene Oxide Nanocomposite as an
Yuan Meng1, Fenghua Su1, Zhujun Li2
1School of Mechanical and Automotive Engineering , South China University of Technology , Guangzhou 510641 , China.
Abstract:
Copper oxide/reduced graphene oxide (CuO/rGO) nanocomposite was synthesized by an effective approach combining supercritical hydrolysis and facile thermolysis. The as-synthesized CuO/rGO exhibited a unique microstructure in which ultrafine CuO nanoparticles were encapsulated by several stacked rGO nanosheets. The highly dispersed CuO nanoparticles on the rGO nanosheets were in spherical shape with diameters around 6 nm and had a base-centered monoclinic crystal structure. Tribological performances of the CuO/rGO nanocomposite as a lubricant additive of 10w40 engine oil were evaluated by a ball-on-disc tribotester under boundary lubrication. As compared to the bare 10w40 engine oil, the engine oil with 0.06-0.18 wt % CuO/rGO exhibits the reductions of 46.62 and 77.05% for friction coefficient and wear rate, respectively. In addition, CuO/rGO as a nanoadditive displays superior lubricating abilities than rGO, CuO, and their mechanical mixture. This synergistic lubricating effect of the CuO/rGO nanocomposite was mainly contributed to its special nanostructure rather than only the coexistence of CuO and rGO. The antiwear and friction-reducing mechanism of the CuO/rGO nanoadditive mainly results from its synergistic lubricating effect and the formed tribofilms on the wear surface due to the spontaneous deposition behavior of the nanocomposite. In addition, influences of the nanoadditives including rGO, CuO, the mixture, and CuO/rGO on the rheological behaviors and the elastohydrodynamic lubrication (EHL) oil film of the modified engine oil were also investigated. Results show that these nanoadditives can increase the viscosity of the engine oil to a certain extent throughout the test temperature range of 0-60 °C. The remarkable increase in viscosity by addition of the CuO/rGO nanoadditive corresponds to the thickening of the EHL film and the strengthening of the EHL state for the engine oil with CuO/rGO as compared to the bare one.
More Related Videos
Related Concept Videos
Redox Titration: Other Oxidizing and Reducing Agents
Oxidation-Reduction Reactions
Base-Catalyzed Aldol Addition Reaction
Conjugate Addition (1,4-Addition) vs Direct Addition (1,2-Addition)
Conjugate addition results in a thermodynamically stable product. The reaction retains the stronger C=O bond at the expense of the weaker C=C π bond. The process is slow as the β carbon is less electrophilic than the carbonyl carbon.
Direct addition products are...
Oxidation Numbers
Areas Within Irregular Boundaries

