Related Experiment Video
Updated: Jan 21, 2026

The Effect of Charging and Discharging Lithium Iron Phosphate-graphite Cells at Different Temperatures on Degradation
Published on: July 18, 2018
Experimental study of nitrobenzene degradation in water by strong ionization dielectric barrier discharge
Muhammad Imran Nawaz1, Chengwu Yi1, Hong Zhao1
1School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang, People's Republic of China.
Abstract:
Nitrobenzene (NB) is toxic and carcinogenic aromatic compound widely used in several industries which is ultimately found in their effluents. In this work, dielectric barrier discharge (DBD) reactor was employed for the degradation of nitrobenzene in aqueous solution. Active species like O3 and •OH produced by DBD reactor were mixed with water which degraded the NB. The results indicated that the lower NB concentrations slightly acidic conditions and high voltage ranges showed the optimum efficiencies. Moreover, the impacts of active species inhibitors isopropyl alcohol (IPA), tert-butanol (TBA), inorganic ions for instance sulfates ( ), bicarbonates ( ), nitrates ( ), carbonates ( ) and chlorides (Cl-) on the degradation of NB were examined. This analysis showed that the hydroxyl radical was captured by the addition of these inhibitors and resulted in the decrease in efficiencies. Byproducts produced during the degradation of nitrobenzene were assessed by analytical techniques of high-performance liquid chromatography (HPLC), liquid chromatography-mass spectrometry (LC-MS), UV-visible spectroscopy and total organic carbon (TOC) analysis. Main intermediate products were nitrophenols and low molecular weight organic acids including oxalic acid and acetic acid that were eventually mineralized to CO2 and H2O. The dielectric barrier discharge technology was found productive for the degradation of nitroaromatic compounds.
Related Concept Videos
Titration Calculations: Strong Acid - Strong Base
A titration is carried out for 25.00 mL of 0.100 M HCl (strong acid) with 0.100 M of a strong base NaOH. The pH at different volumes of added base solution can be calculated as follows:
(a) Titrant volume = 0 mL. The solution pH is due to the acid ionization of HCl. Because this is a strong acid, the ionization is complete and the hydronium ion molarity is 0.100 M. The pH of the solution is then:
Ionization Energy
Strong Acid and Base Solutions
Titration of a Strong Acid with a Strong Base
Discharge Summary Forms
Here's a detailed look at the key components and guidelines for preparing a discharge summary:
Capacitor With A Dielectric
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...

