Related Experiment Video
Updated: Jan 21, 2026

Two-Dimensional X-Ray Angiography to Examine Fine Vascular Structure Using a Silicone Rubber Injection Compound
Published on: January 7, 2019
Study on the Anticondensation Characteristics of Liquid Silicone Rubber Temperature-Control Coatings
Juyi Guo1, Xilin Wang2, Jun Wang3
1Engineering Laboratory of Power Equipment Reliability in Complicated Coastal Environment, Graduate school at Shenzhen, Tsinghua University, Shenzhen 518055, China.
Abstract:
Metal cabinets such as switch cabinets and ring network cabinets have the advantages of small footprints and good protection for equipment and offer neat and orderly protection. They are widely used in power systems. In a hot and humid environment, condensation can easily cause equipment to age and even cause insulation failure. Therefore, research on reliable anticondensation methods is of great significance for the safe operation of power equipment. In this study, phase change capsules with phase transition temperatures of 22 and 32 °C were used as fillers and liquid silicone rubber was used as a matrix to prepare liquid silicone rubber composites filled with phase change capsules for a temperature-control coating. Studies have shown that liquid silicone rubber coatings containing phase change capsules can significantly enhance the anticondensation performance of metal cabinets. By using a temperature-control coating on the surface where the cabinet experiences condensation, the temperature difference between the surface and the dew point is reduced, thereby slowing down the condensation rate and even preventing condensation.
More Related Videos
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Temperature
Characteristics of Life
Types of Biopharmaceutical Studies: Controlled and Non-Controlled Approaches
Non-controlled studies, commonly employed for initial exploration, lack a control group, rendering them susceptible to biases and external influences. In contrast,...
Characteristics of Fluids
Characteristics of Fluids
Fluids, which include both liquids and gases, are substances that deform continuously under shearing stress. For example, water and oil are liquids with molecules that can...
Characteristics of BJT
For input characteristics, the base-emitter voltage is varied, maintaining a constant collector-emitter voltage. This setup reveals a Shockley-type dependence of the collector current on...

