Related Experiment Video
Updated: Jan 21, 2026

Calcium Carbonate Formation in the Presence of Biopolymeric Additives
Published on: May 14, 2019
Novel Carbon Nanoparticles Derived from Biodiesel Soot as Lubricant Additives
Chuan Li1,2, Mingling Li3, Xinyun Wang1
1School of Chemistry and Material Engineering, Chaohu University, Hefei 238000, China.
Abstract:
The objective of this study was to investigate the roles and tribological mechanisms of onion-like carbon nanoparticles derived from biodiesel soot (BDS) when applied in water (H2O) and liquid paraffin (LP). In this study, we prepared nitric acid-treated BDS (NA-BDS) as an additive to H2O and NA-BDS modified with oleylamine (NA-BDS-OLA) as an additive to LP. Raman spectroscopy, field-emission transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potentiometry were used to characterize the results of the nitric acid treatment and oleylamine modification. The tribological behaviors and corresponding mechanisms of the new onion-like carbon nanoparticles were evaluated using a ball-on-disc reciprocating tribometer, as well as field-emission scanning electron microscopy, three-dimensional laser scanning microscopy, and Raman spectroscopy. The results indicated that the additives NA-BDS and NA-BDS-OLA, which were onion-like carbon nanoparticles with sizes ranging from 35 to 40 nm, enhanced the antiwear and friction reduction properties of H2O and LP, respectively. Through tribo-mechanisms, these types of soot can serve as spacers and ball bearings between the rubbing surfaces. Moreover, exfoliation under a high load as a result of the formation of a graphitic layer facilitates easy shearing.
Related Concept Videos
Conjugate Addition (1,4-Addition) vs Direct Addition (1,2-Addition)
Conjugate addition results in a thermodynamically stable product. The reaction retains the stronger C=O bond at the expense of the weaker C=C π bond. The process is slow as the β carbon is less electrophilic than the carbonyl carbon.
Direct addition products are...
Carbon Skeletons
The Carbon Cycle
Conjugate Addition of Enolates: Michael Addition
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular velocity...
Additional Subnuclear Structures
The nucleus contains many membrane-less subnuclear organelles or nuclear bodies, such as nucleoli, Cajal bodies, speckles,...

