Design and synthesis of organic rectorite-based composite nanofiber membrane with enhanced adsorption performance for...

Nowadays, most of mineral-based adsorbents are powder form, which makes them inconvenient to collect and always easy to cause secondary pollution. In this work, an organic rectorite composite nanofiber membrane (SRt-PAN) was designed and prepared by electrospinning technique. The as-received composite nanofiber membranes were characterized by XRD and SEM analysis, proving the homodisperse and existence of SRt in PAN nanofiber membrane. A series of batch experiments for BPA adsorption were carried out to investigate the effect of different adsorption parameters, including initial concentration, pH, and temperature of pollutant solution. The influences of modifier dosage and adsorbent dosage on the adsorption performance were investigated as well. On the basis of the experiment results, the adsorption process could be well described by the pseudo-second-order model and the Langmuir isotherm. In addition, the thermodynamic parameters indicate that this adsorption process is exothermic and spontaneous. Moreover, compared with pure nanofiber membranes and organic rectorite powders, the resultant SRt-PAN adsorbents exhibited higher adsorption capacity, superior reusability, and adsorption stability. It is indicated that the hydrophobicity surface of organic rectorite should be the key factor to not only the intimate interfacial combination between the mineral and PAN, but also the enhancement of BPA adsorption capacity.