Related Experiment Video
Updated: Jan 21, 2026

Dynamic Electrochemical Measurement of Chloride Ions
Published on: February 5, 2016
UV-Improved Removal of Chloride Ions from Strongly Acidic Wastewater Using Bi2O3: Efficiency Enhancement and
Wenyue Dou1, Xingyun Hu, Linghao Kong
1University of Chinese Academy of Sciences , Beijing 100049 , China.
Abstract:
Strongly acidic wastewater generated from nonferrous metal smelting industries can be recycled as sulfuric acid after the contaminants have been removed, and among which, Cl- is rather difficult to remove. Although previous studies showed that Cl- can be removed from acidic Zn electrolyte by Bi2O3, this method still suffers from low efficiency when being employed for strongly acidic wastewater recycling. Otherwise, very high Bi2O3 dosage and H2SO4 concentration are required, leading to the need for improvement. In this study, UV irradiation was employed to improve the removal, and it was found that Cl- removal efficiency was substantially enhanced from 63.9 to 98.3%, the optimum Bi2O3/Cl- mole ratio was lowered from 1.5:1 to 0.5:1, and to achieve the maximum removal efficiency, the required H2SO4 concentration was lowered from 70 to 40 g/L. The mechanisms were also elaborated. First, Bi2O3 dissolves under the function of UV and H+, and the produced Bi3+ combines with H2O and Cl- to form BiOCl. Then, Bi2O3/BiOCl transforms into BiOCl(h+)/Bi2O3(e-) under UV irradiation, and the generated h+ oxidizes Cl- to Cl•. Finally, Cl• reacts with Bi2O3/e- to produce BiOCl. This study offered a theoretical foundation for the improvement of Cl- removal from strongly acidic wastewater.
More Related Videos
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
06:54Author Spotlight: Understanding and Detecting Environmental Antimicrobial Resistance by Combining Culture-Based Techniques and Genomics
Published on: July 19, 2024
Related Concept Videos
Ions as Acids and Bases
Salts are ionic compounds composed of cations and anions, either of which may be capable of undergoing an acid or base ionization reaction with water. Aqueous salt solutions, therefore, may be acidic, basic, or neutral, depending on the relative acid-base strengths of the salt’s constituent ions. For example, dissolving the ammonium chloride in water results in its dissociation, as described by the equation:
Carboxylic Acids to Acid Chlorides
IR and UV–Vis Spectroscopy of Carboxylic Acids
However, the stretching absorptions for the C=O bond vary depending on the structure of carboxylic acids. The C=O bond of the free carboxylic acids shows a higher stretching frequency, 1760 cm−1, while H-bonded carboxylic acids (dimers) exhibit stretching absorptions at a lower frequency,...
Common Ion Effect
Mechanically-gated Ion Channels
Precipitation of Ions
The equation that describes the equilibrium between solid calcium carbonate and its solvated ions is: