Related Experiment Video
Updated: Jan 21, 2026

Electrostatic Method to Remove Particulate Organic Matter from Soil
Published on: February 10, 2021
Sericin-coated polyester based air-filter for removal of particulate matter and volatile organic compounds (BTEX)
Vishal Kumar Verma1, Senthilmurugan Subbiah1, Sri Harsha Kota2
1Department of Chemical Engineering, Indian Institute of Technology, Guwahati, 781039, India.
Abstract:
Particulate matter and volatile organic compounds have emerged as a prime environmental concern with increasing air pollution in metropolitan cities leading to lung and heart-related issues. This paper describes a facile and novel method for fabrication of polyester based air filter via surface coating with Sericin for imparting effective removal of particulate matter and volatile organic compounds. A simple dip-coating method followed by thermal fixation has been adopted to coat Sericin on the polyester fiber. The developed changes in surface functionality and morphology of the polyester fiber were confirmed by Attenuated total reflection Fourier-transform infrared spectroscopy and Field emission scanning electron microscopy analysis. The fabricated air filter was tested for removal of particulate matter (generated burning incense stick) and volatile organic compounds (generated vaporizing gasoline), in an indoor chamber. The Sericin coated filter was able to remove the PM2.5 and PM 10 (from 1000 μg/m3 level to 5 μg/m3 in a 6.28 m3 chamber) within 27 and 23 min of operation, respectively. The fabricated filter very effectively removed particulate matter for 2160 cycles with intermittent washing. The Sericin-coated air filter also proved very effective for removal of volatile organic compounds (Benzene, Toluene, Ethylbenzene and Xylene) from an indoor chamber at a varying initial concentration of 100-1000 μg/m3. The adsorption behavior was described by Langmuir-Freundlich (sips) isotherm and pseudo-first order kinetics with minimal error. The maximum adsorption capacity (mg/g) obtained with Sips Isotherm fitting followed the order Xylene (6.97)>Ethyl Benzene (5.68)> Toluene (5.35) >Benzene (4.78).
Related Concept Videos
Organic Compounds
Air-entraining Agents
Effects of Air-entrainment in Concrete
Measurement of Air Content in Concrete
The pressure method,...
Classifying Matter by State
Classifying Matter by Composition
According to its composition, the matter can be classified into two broad categories — pure substances and mixtures.
A pure substance is a form of matter that has a constant composition throughout with uniform properties. For example, any sample of sucrose has the same composition and same physical properties, such as melting point, color, and sweetness, regardless of the source from which it is isolated.
A mixture is composed of two or...

