Related Experiment Video
Updated: Jan 21, 2026

Scalable Syntheses of Graphene Oxide and Reduced Graphene Oxide using Cascade Design Oxidation and Highly Basic Reduction Reactions
Published on: July 3, 2025
Zwitterionic Hydrogel Incorporated Graphene Oxide Nanosheets with Improved Strength and Lubricity
Zhongnan Wang1, Jinjin Li1, Liang Jiang2
1State Key Laboratory of Tribology , Tsinghua University , Beijing 100084 , China.
Abstract:
Graphene oxide (GO) has been evaluated as a multifunctional cross-linker or reinforcement agent in composite hydrogels. In this study, a nanocomposite hydrogel consisting of GO nanosheets and zwitterionic poly(sulfobetaine methacrylate) (PSBMA) was synthesized in an aqueous system via chemical and physical cross-linking effects. GO nanosheets were well dispersed in the hydrogels and effectively cross-linked into the sulfobetaine methacrylate (SBMA) polymer chains through the electrostatic interactions. The PSBMA hydrogel exhibited a significant enhancement in the compressive stress (close to a 5-fold increase) and a remarkable reduction in the coefficient of friction (COF) (corresponding to a decline of 52-76%) after the embedding of GO nanosheets. These improvements indicate the existence of synergetic interaction and good compatibility between GO nanosheets and the PSBMA hydrogel matrix, which results in an intertwined network structure with higher load-bearing capacity and better lubrication properties. This study provides potential in the development of new graphene-polymer composites, which is beneficial for cartilage replacement with high mechanical properties and excellent lubrication characteristics.
Related Concept Videos
Acid Strength and Molecular Structure
In the absence of any leveling effect, the acid strength of binary compounds of hydrogen with nonmetals (A) increases as the H-A bond strength decreases down a group in the periodic table. For group 17, the order of increasing acidity is HF < HCl < HBr < HI. Likewise, for group 16, the order of increasing acid strength is H2O < H2S < H2Se < H2Te. Across a row in the periodic table, the acid strength of binary hydrogen compounds increases with increasing...
Oxidation Numbers
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Relation Between Tensile Strength and Compressive Strength of Concrete
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular velocity...
The Equilibrium Binding Constant and Binding Strength

