Related Experiment Video
Updated: Jan 20, 2026

Application of Ultrasound and Shear Wave Elastography Imaging in a Rat Model of NAFLD/NASH
Published on: April 20, 2021
Pulmonary Capillary Hemorrhage Induced by Super Sonic Shear Wave Elastography in Rats
Douglas L Miller1, Zhihong Dong1, Chunyan Dou1
1Department of Radiology, University of Michigan, Ann Arbor, Michigan, USA.
Abstract:
The occurrence of the pulmonary capillary hemorrhage (PCH) bioeffect of diagnostic ultrasound in rats was investigated for a SuperSonic Imagine shear wave elastography system (Aixplorer, Supersonic Imagine, Aix-en-Provence, France). The elastography imaging repeated at 1 Hz and consisted of widely spaced B-mode image pulses, supersonic push (SSP) pulses and shear wave imaging (SWI) pulses. Groups of rats anesthetized with ketamine and xylazine, or with ketamine only, were imaged on their right side in a warm water bath for one frame, 30 s and 300 s. The image focus and region of interest were adjusted to give exposure only with the background B-mode imaging, or primarily with the SSP and SWI pulses. A sham group had only low power aiming scans. The lungs were removed 5 min after exposure and evaluated for PCH area and volume. The B mode was notably ineffective and produced significant PCH only at the maximum 0 dB output. The SSP pulses together with the SWI pulses produced significant PCH for 300 s, 30 s and even single image exposures. Peak rarefactional pressure amplitude PCH thresholds for 300 s exposure were the same with or without the B-mode pulses at 1.5 MPa (in situ mechanical index, MIIS = 0.67). A 30 s duration resulted in a slightly increased threshold of 1.7 MPa (MIIS = 0.76). The omission of xylazine from the anesthetic, which reduces the sensitivity of rat lung to PCH occurrence, resulted in an increased threshold of 2.1 MPa (MIIS = 0.94). The unique SSP pulses were much more effective than the B mode, but thresholds were comparable to previous results with other diagnostic ultrasound modes on other systems.
More Related Videos
Related Concept Videos
The Wave Nature of Light
Shearing Stress
The average shearing stress can be calculated by dividing the shear by the area of the cross-section.
Shearing Strain
Shear Diagram
First, a free-body diagram of the beam is drawn, representing all the external forces and internal reactions acting on the beam. One can calculate the reaction forces at each support by employing the equilibrium equations of force and moment. The vertical component...
Capillary Beds
Capillaries connect arterioles, small branches of arteries, to venules,...
Capillary Exchange

