Related Experiment Video
Updated: Jan 20, 2026

Author Spotlight: Process Development for the Spray-Drying of Probiotic Bacteria and Evaluation of the Product Quality
Published on: April 7, 2023
Effect of selected pretreatments prior to drying on physical quality attributes of dried mango chips
Isaac Nyangena1, Willis Owino1, Jane Ambuko2
11Department of Food Science and Technology, School of Food and Nutrition Sciences, Jomo Kenyatta University of Agriculture and Technology, P. O. Box 62000-00200, Nairobi, Kenya.
Abstract:
This study investigated the effect of pretreatments namely citric acid, lemon juice and blanching on the physical attributes of dried chips from two popular commercial mango varieties grown in Kenya viz 'Apple' and 'Ngowe'. The pretreated mango chips were either subjected to a convective dryer or solar drying. Moisture content, extent of dryness, rehydration characteristics, water activity and color retention were determined to establish the effect of the pretreatments before drying on physical quality attributes of dried mango chips. Moisture content, water activity and color were determined using standard procedures. Equilibrium relative humidity was estimated using Drycard™. Results obtained indicated that optimal drying was achieved with dryer temperatures of 50 °C and 65 °C for 10 and 7 h respectively that reduced moisture content to ~ 11% and water activity to below 0.65 (sufficient for inhibited spoilage). The best color parameters and rehydration characteristics were observed with 1% citric acid and 0.5 v/v lemon acid pretreated samples. Blanched as well as control (untreated) samples showed relatively poor color retention in relation to flesh mango chips and had the least rehydration ratio (1.65 ± 0.01) and coefficient of rehydration (0.33 ± 0.1). As pretreatments before drying affect physical parameters of dried mango chips, the best choice of pretreatments should be made to produce high quality end products. Citric acid and lemon juice pretreatments before drying at 50 °C and 65 °C had the optimal outcome and produced the best physical quality parameters.
More Related Videos
13:42Dry Film Photoresist-based Electrochemical Microfluidic Biosensor Platform: Device Fabrication, On-chip Assay Preparation, and System Operation
Published on: September 19, 2017
08:38Quantification of the Immunosuppressant Tacrolimus on Dried Blood Spots Using LC-MS/MS
Published on: November 8, 2015
Related Concept Videos
Dry Friction
To illustrate this concept, imagine a wooden crate resting on a rough, non-uniform horizontal surface. When an external force is applied to...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
Washing, Drying, and Ignition of Precipitates
Formulation and Manufacturing Process: Physical Attributes of Generic Tablets and Capsules
Attribution Theory