Related Experiment Video
Updated: Jan 20, 2026

Author Spotlight: Advancing Anaerobic Microbiota Research Using a Novel Respirometry Protocol
Published on: April 26, 2024
Optimization of operating conditions for the acidification metabolites production with waste sludge using response
Yu Wang1, Liang Guo2,3,4, Jiawen Zhang1
1College of Environmental Science and Engineering, Ocean University of China, Qingdao, 266100, China.
Abstract:
The acidification liquid of waste activated sludge (WAS) could be used as the additional carbon source of biological nutrient removal. Recently, the optimization of operating conditions for the acidification metabolites has attracted much attention. In this study, a three-factor Box-Behnken design (BBD) was applied to determine the relative importance of the various factors and the optimum operating during acidification using response surface method (RSM). The importance of the individual variables on the production of soluble chemical oxygen demand (SCOD) was suspended solids (SS) > shaking rate > initial oxidation-reduction potential (ORP). The increase on SS content led to a decrease on the acidification degree. Low SS could promote mass exchange and microbial activity. The maximum SCOD yield (9288.5 mg/L) was predicted under the optimum condition at 8.0 g/L SS, 144.0 mV initial ORP, and 60.0 r/min shaking rate. Also, the releasing of soluble protein and carbohydrate was calculated as responses. The individual effect of shaking rate and initial ORP had significant effect on soluble protein and carbohydrate releasing, respectively. This study would provide valuable information for increasing the efficiency of acidification.
More Related Videos
05:51Evaluating Leaf Responses to Microbial Secondary Metabolites Using A High-Throughput Format
Published on: December 5, 2025
15:19Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Related Concept Videos
Response Surface Methodology
The process of RSM involves several key steps:
Operant Conditioning
Reinforcement in operant conditioning can be positive or negative, both of which serve to increase the likelihood of a behavior. Positive...
Operant Conditioning Intervention
In operant conditioning, behaviors that are...
Role of Shaping in Operant Conditioning
The steps involved in shaping begin with reinforcing any response that resembles the desired behavior. For example, parents might praise a child for picking up one toy. As...
Operational Amplifiers
Responses to Drought and Flooding