Related Experiment Video
Updated: Jan 20, 2026

Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater
Published on: March 6, 2017
Removal of ametryn and organic matter from wastewater using sequential anaerobic-aerobic batch reactor: A performance
Gajanuru Basappa Mahesh1, Basavaraju Manu1
1Department of Civil Engineering, National Institute of Technology, Karnataka, Surathkal, Srinivasnagar (PO), Mangaluru, D.K., Karnataka, 575025, India.
Abstract:
The present study was aimed to investigate biodegradation of 2-(ethylamino)-4-(isopropylamino)-6-(methylthio)-s-triazine (ametryn) in a laboratory-scale anaerobic sequential batch reactor (ASBR) and followed by aerobic post-treatment. Co-treatment of ametryn with starch is carried out at ambient environmental conditions. The treatment process lasted up to 150 days of operation at a constant hydraulic retention time (HRT) of 24 h and an organic loading rate (OLR) of 0.21-0.215 kg-COD/m3/d. Ametryn concentration of 4 and 6 mg/L was removed completely within 48-50 days of operation with chemical oxygen demand (COD) removal efficiencies >85% at optimum reactor conditions. Ametryn acted as a nutrient/carbon source rather causing toxicity and contributed to methane gas production and sludge granulation in the anaerobic reactor. Biotransformation products of ametryn to cyanuric acid, biuret, and their further conversion to ammonia nitrogen and CO2 are monitored during the study. Adsorption of ametryn on to reactor sludge was negligible, sludge granulation, presence of ANAMMOX bacteria, and low MLVSS/MLSS ratio between 0.68 and 0.72. The study revealed that ametryn removal occurred mainly due to biodegradation and co-metabolism processes. Aerobic post-treatment of anaerobic effluent was able to remove COD up to 95%. The results of this study exhibit that anaerobic-aerobic treatment is feasible due to easy operation, economic, and highly efficient.
Related Concept Videos
Classifying Matter by State
Classifying Matter by Composition
According to its composition, the matter can be classified into two broad categories — pure substances and mixtures.
A pure substance is a form of matter that has a constant composition throughout with uniform properties. For example, any sample of sucrose has the same composition and same physical properties, such as melting point, color, and sweetness, regardless of the source from which it is isolated.
A mixture is composed of two or...
Physical and Chemical Properties of Matter
The Atomic Theory of Matter
States of Matter
Scientists have discovered a fourth state of matter, plasma, that occurs naturally in the interiors...
What is Matter?

