Comparison of fracture toughness measurements for zirconia materials using two test methods
Jan Ulrich Jansen1, Nina Lümkemann1, Beatrice Sener2
1Department of Prosthetic Dentistry, Dental Material Unit, Ludwig-Maximilians-University Munich.
Abstract:
To determine the influence of the fracture toughness (KIC) methods [single-edge-V-notch-beam (SEVNB) and chevron-notch-beam (CNB)] as well as an optional heat treatment on the KIC of three different zirconia generations (1st: ZI, 3rd: FX, 4th: HT). One hundred and twenty specimens each (3×4×45 mm) were fabricated, sintered, notched (n=360) and half of them heat treated before KIC measurements with 4-point-flexural-strength test. SEM images of the notches were recorded. Highest KIC was found for ZI followed by HT and FX. SEVNB resulted in significantly higher KIC than CNB. Heat treatment resulted in decrease for SEVNB and increase for CNB of KIC (except for FX). Groups tested using CNB showed higher reliability of values (Weibull modulus) than tested using SEVNB. SEM images present crack path and fracture surface. Different zirconia materials lead to different KIC values. The test method and a prior heat treatment showed an influence on the KIC values and their reliability.
Related Concept Videos
Toughness and Hardness of Aggregate
Renal Drug Clearance: Comparison Between Renal Excretion Methods
Renal clearance is often associated with the renal glomerular filtration rate (GFR), which represents the rate at which plasma is filtered through the glomeruli in the kidney. When drug reabsorption is minimal and there is no active secretion, renal clearance is closely related to the...
The Sense of Self: Reflected Self-Appraisal and Social Comparison
Multiple Comparison Tests
It would be easy to compare two samples using a significance alpha level of 0.05. In other words, there is only one sample pair to be compared. However, it would be difficult to identify a significantly different sample if the number...
Fractures: Bone Repair
Minor fractures with no bone displacement are treated by immobilizing the fractured bone using a cast or splint. However, in the case of fractures with displaced bones, the broken bones are repositioned before immobilization to ensure successful healing without deformation and loss of function. The realignment of fractured bone ends is performed through a process called reduction. If the...
Evolutionary Relationships through Genome Comparisons


