Related Experiment Video
Updated: Jan 20, 2026

Multifunctional Hybrid Fe2O3-Au Nanoparticles for Efficient Plasmonic Heating
Published on: February 20, 2016
Durable and Multifunctional Superhydrophobic Coatings with Excellent Joule Heating and Electromagnetic Interference
Lisheng Wu1, Ling Wang1, Zheng Guo1
1School of Chemistry and Chemical Engineering , Yangzhou University , Yangzhou , Jiangsu 225002 , China.
Abstract:
Superhydrophobic coatings have wide applications in many fields. However, superhydrophobic and smart coatings with multifunctionality and their applications in flexible sensing electronics are seldom reported. In this work, durable, superhydrophobic, and anticorrosive coatings with excellent Joule heating and electromagnetic interference (EMI) shielding performance are prepared on the basis of Ag precursor reduction and synchronous nonsolvent induced phase separation. Silver nanoparticles (AgNPs) coated with the copolymer (polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene: SEBS) are uniformly distributed on the target substrate, forming mechanically durable conductive network. SEBS could not only endow the surface coating with superhydrophobicity but also improve the interaction among individual Ag nanoparticles and the interfacial adhesion between AgNPs and the substrate. The multifunctional coating possesses excellent anticorrosive, self-cleaning, and deicing properties. The high conductivity endows the coatings with excellent Joule heating and EMI shielding performance. The multifunctional coating can be applied to a variety of different substrates with outstanding surface stability and reliability. The conductivity for the smart coating can reach as high as 107 S/cm with the EMI shielding effectiveness up to 37.8 dB. At a low applied voltage of 1 V, the conductive fabric can be heated up to over 80 °C in 60 s and displays good recyclability during dozens of heating and cooling cycles. The Joule heating-induced temperature increase could be used for efficient surface deicing. When used for the flexible and wearable strain sensors, the multifunctional coating has a very low strain detection limit of 0.5% and large sensitivity (with the gauge factor as high as 1075) and excellent repeatability. In addition, it can be used for precisely monitoring different body motions, including both large and subtle joint movement.
More Related Videos
07:37TiO2-coated Hollow Glass Microspheres with Superhydrophobic and High IR-reflective Properties Synthesized by a Soft-chemistry Method
Published on: April 26, 2017
07:20Screening of Coatings for an All-Solid-State Battery Using In Situ Transmission Electron Microscopy
Published on: January 20, 2023
Related Concept Videos
Performing a Simple Data Analysis using MS-Excel Function
SUM: This function calculates the total sum of a range of values. It's the foundation for aggregating data, essential for determining overall trends and totals in datasets.
AVERAGE: It computes the mean value of a given set of numbers, providing a quick insight into the central...
The Electromagnetic Spectrum
Joule-Thomson Effect
This experiment forces high-pressure gas through a throttle valve or a porous plug to a lower-pressure region. The gas expands as it passes through to...
Quantifying Heat
Microsoft Excel: Plotting Mean, SD, and SE
First, calculate the mean, SD, and SE of your data. The mean is obtained using the formula `=AVERAGE(range)`, while SD can be calculated with `=STDEV.P(range)` for a population or `=STDEV.S(range)` for a sample. SE is calculated as `=SD/SQRT(n)`, where `n` is the sample size.
To plot these values, use a bar...
Interference and Diffraction