Related Experiment Video
Updated: Jan 20, 2026

Surface Properties of Synthesized Nanoporous Carbon and Silica Matrices
Published on: March 27, 2019
Determination of ignition temperature of municipal solid waste for understanding surface and sub-surface landfill
Digambar Chavan1, P Lakshmikanthan1, Papiya Mondal1
1CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur 440020, India.
Abstract:
Open dumping of municipal solid waste (MSW) is a common practice in India which leads to a number of problems like non-uniform compaction, slope failure, percolation of water during rainy seasons, abrupt leachate generation and stability issues. It also leads to various other issues, such as manual scavenging and deliberate waste burning. During the waste degradation process, an enormous amount of heat and landfill gases (LFGs) like carbon dioxide (CO2) and methane (CH4) are generated. Biological and chemical reactions happening at the surface and inside the landfill contribute to the heat generation. Initiation of waste ignition is a major cause of spontaneous landfill fire. The risk posed by landfill fires is high in India as most of the landfills are non-engineered. The present study aims to determine the ignition temperature of waste dumped at Bhandewadi dumpsite located at Nagpur, India which will enable a better understanding of the initiation of fires in non-engineered landfill (surface and sub-surface fires), especially in Indian condition. The results of the present study showed that ignition temperature is directly proportional to the moisture content of MSW for its values ranging from 5 to 55% by mass. The correlation of smoldering time (Ts) and ignition time (Ti) of MSW with its age under gradual temperature rise in a muffle furnace (i.e., 3 °C/min) were also studied and it was found that Ts and Ti are directly proportional to the age of MSW and the values ranged from 23 to 34 min for Ts and 27 to 48 min for Ti.
Related Concept Videos
Surface Tension and Surface Energy
Consider a beaker filled with liquid. The bulk molecules in the liquid experience equal attractive forces on all sides with the surrounding molecules. However, the surface molecules experience a net attractive force downward due to the bulk molecules. The surface of the liquid behaves like a stretched membrane,...
Wood Surfacing
The equipment used in the surfacing process is a plane equipped with rotating blades. This tool efficiently smoothens the wood surface and can...
Cell-surface Signaling
Surface Tension, Capillary Action, and Viscosity
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded by other molecules and are attracted equally in all directions by the cohesive forces within the liquid. However, the molecules on the surface of a liquid are attracted only by about one-half as many molecules. Because of the unbalanced molecular attractions on the surface molecules, liquids contract to form a shape that minimizes the number...
Surface Appendages of Archaea
Surface Membrane Barriers
The outer layer of the skin, the epidermis, is a robust barrier comprising layers of closely packed keratinized cells. This dense arrangement prevents microbes from penetrating the body. The periodic shedding of epidermal cells...

