Related Experiment Video
Updated: Jan 20, 2026

Ethylene Polymerizations Using Parallel Pressure Reactors and a Kinetic Analysis of Chain Transfer Polymerization
Published on: November 27, 2015
Thermal Decomposition of Ethyl Diazoacetate in Microtube Reactor: A Kinetics Study
1State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China.
Abstract:
Ethyl diazoacetate (EDA) commonly experiences intensive decomposition as well as complex conversion concerning safety and efficiency. In this work, a careful kinetics study on the thermal decomposition of EDA was isothermally conducted in a microtube reactor to establish a mechanism-based kinetic model. The model parameters were well calibrated with experimental data including the yield of dimmers and the conversion of EDA, confirming the rationality of the proposed three-step reaction route. It allows the model to concisely describe the complex species transformations during EDA decomposition, which is unavailable for an apparent kinetic model. Considering an isothermal reaction system and the tolerance of EDA consumption by thermal decomposition, this work could help reveal the requirement on the kinetic characteristics of the desired catalytic reaction in which EDA is involved, as a reference on reaction process modeling and regulation.
More Related Videos
11:25Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway
Published on: March 7, 2022
09:02Manganese Oxide Nanoparticle Synthesis by Thermal Decomposition of ManganeseII Acetylacetonate
Published on: June 18, 2020
Related Concept Videos
07:28Ethylene Polymerizations Using Parallel Pressure Reactors and a Kinetic Analysis of Chain Transfer Polymerization
11:25Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway
Liquid Phase Reactor: Sucrose Inversion
Both batch and continuous flow reactors are used in catalytic reactions. Packed beds, which use solid catalysts and a continuous flow, are the most common configuration. In the absence of an extensive recycle stream, such packed bed reactors are typically modeled as "plug flow". The other most common continuous reactor is a stirred tank, which is assumed to be...
09:02Manganese Oxide Nanoparticle Synthesis by Thermal Decomposition of Manganese(II) Acetylacetonate
Synthesis and Decomposition Reactions
05:21A Scalable Balz-Schiemann Reaction Protocol in a Continuous Flow Reactor