Related Experiment Video
Updated: Jan 20, 2026

Atom Probe Tomography Studies on the CuIn,GaSe2 Grain Boundaries
Published on: April 22, 2013
Co-segregation behavior of Sc and Zr solutes and their effect on the Al Σ5 (210) [110] symmetrical tilt grain
Zhengbing Xiao1, Jiawei Hu2, Yu Liu2
1State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China. xiaozb@csu.edu.cn and Light Alloy Research Institute, Central South University, Changsha 410012, China.
Abstract:
The research into the co-segregation behavior of Sc and Zr solutes and their effect on the mechanical properties of the Al Σ5 (210) [110] grain boundary was carried out by first principles calculations. It is concluded that Sc and Zr both have a powerful driving force to segregate to the grain boundary, and based on the most negative segregation energy, first one Sc atom segregates to the grain boundary, then one Zr atom and finally another Sc atom. The grain boundary energy, strengthening/embrittling energy, fracture energy and theoretical tensile peak stress all demonstrate that Sc and Zr solutes have a strengthening effect on the grain boundary, which can be attributed to the combination of the "chemical effect" (charge density variation) and the "structural effect" (atomic arrangement change), especially the migration of the first Sc-segregated site toward the grain boundary, which not only brings stronger Sc/Zr-Al bonds instead of weak Al-Al bonds but also leads to the shrinkage and charge accumulation of the great vacuum area between two grains. This work sheds light on the underlying mechanism of the better mechanical performance due to the co-addition of Sc and Zr solutes at the atomic and electronic levels.
Related Concept Videos
09:51Atom Probe Tomography Studies on the Cu(In,Ga)Se2 Grain Boundaries
10:08Phase Behavior of Charged Vesicles Under Symmetric and Asymmetric Solution Conditions Monitored with Fluorescence Microscopy
Nanocrystalline Alloys and Nano-grain Size Stability
Alloys with grain size less than 100 nm are known as nanocrystaline alloys. Due to their enhanced physical and mechanical properties, there is an ever-increasing demand to employ them in various industries such as semiconductor, biosensors and aerospace.
To improve the processing and application of nanocrystalline alloys, it is necessary to develop close to...
Constant Temperature Anemometry: A Tool to Study Turbulent Boundary Layer Flow
A boundary layer is a thin flow region immediately adjacent to the surface of a solid body immersed in flow field. In this region, viscous effects, such as the viscous shear stress, dominate, and the flow is retarded due to the influence of friction between the fluid and the solid surface. Outside of the boundary layer, the flow is inviscid, i.e.,...
09:13Characterization of Ultra-fine Grained and Nanocrystalline Materials Using Transmission Kikuchi Diffraction
The Uncertainty Principle
