Related Experiment Video
Updated: Jan 20, 2026

Solid-state Graft Copolymer Electrolytes for Lithium Battery Applications
Published on: August 12, 2013
Blend Hybrid Solid Electrolytes Based on LiTFSI Doped Silica-Polyethylene Oxide for Lithium-Ion Batteries
Jadra Mosa1, Jonh Fredy Vélez2, Mario Aparicio3
1Instituto de Cerámica y Vidrio (CSIC), C/Kelsen, 5, 28049 Madrid, Spain. jmosa@icv.csic.es.
Abstract:
Organic/inorganic hybrid membranes that are based on GTT (GPTMS-TMES-TPTE) system while using 3-Glycidoxypropyl-trimethoxysilane (GPTMS), Trimethyletoxisilane (TMES), and Trimethylolpropane triglycidyl ether (TPTE) as precursors have been obtained while using a combination of organic polymerization and sol-gel synthesis to be used as electrolytes in Li-ion batteries. Self-supported materials and thin-films solid hybrid electrolytes that were doped with Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) were prepared. The hybrid network is based on highly cross-linked structures with high ionic conductivity. The dependency of the crosslinked hybrid structure and polymerization grade on ionic conductivity is studied. Ionic conductivity depends on triepoxy precursor (TPTE) and the accessibility of Li ions in the organic network, reaching a maximum ionic conductivity of 1.3 × 10-4 and 1.4 × 10-3 S cm-1 at room temperature and 60 °C, respectively. A wide electrochemical stability window in the range of 1.5-5 V facilitates its use as solid electrolytes in next-generation of Li-ion batteries.
More Related Videos
11:04Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature
Published on: December 20, 2016
10:58Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing
Published on: March 7, 2018
Related Concept Videos
05:33Solid-state Graft Copolymer Electrolytes for Lithium Battery Applications
11:04Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature
10:58Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing
10:41Three-electrode Coin Cell Preparation and Electrodeposition Analytics for Lithium-ion Batteries
11:25In Situ Neutron Powder Diffraction Using Custom-made Lithium-ion Batteries
10:03Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques