Related Experiment Video
Updated: Jan 20, 2026

Three-electrode Coin Cell Preparation and Electrodeposition Analytics for Lithium-ion Batteries
Published on: May 22, 2018
Effect of Acid Leaching on Silicon Nanoparticles and Their Electrochemical Performance in Lithium-Ion Batteries
Rui Sun1, Hui Xu1, Shuijin Hang1
1Suzhou Key Laboratory of Functional Ceramic Materials, Changshu Institute of Technology, Changshu 215500, PR China.
Abstract:
In this work, crystalline Si nanoparticles are synthesized on a large scale via a low temperature molten salt method. The crystal morphologies and electrochemical properties of the samples after HCl and HF leaching are studied in detail. The electrochemical properties of the as-produced silicon samples, which are used as anode materials in lithium-ion batteries (LIBs), are evaluated. The final product, which contains more Si and less SiO², improves cyclic stability because it buffers the volumetric effect of Si during lithiation/delithiation. The HF acid leach removes the impurity of SiO². However, the prepared sample exhibits lower electrochemical properties. The sample with a low SiO² content can deliver a capacity of 1503 mAh g-1 after 50 cycles at a higher current density of 1 A g-1, and the Coulombic efficiency is approximately 100%. However, the sample after HF acid leaching only delivers a discharge capacity of 389 mAh g-1 at 1 A g-1 after 50 cycles.
Related Concept Videos
10:41Three-electrode Coin Cell Preparation and Electrodeposition Analytics for Lithium-ion Batteries
11:25In Situ Neutron Powder Diffraction Using Custom-made Lithium-ion Batteries
10:53Preparation of Graphene Liquid Cells for the Observation of Lithium-ion Battery Material
10:03Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques
11:04Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature
10:58Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing

