Related Experiment Video
Updated: Jan 19, 2026
Gas Absorber, Variable Flow Rate and Mass Transfer Coefficient
Published on: April 30, 2023
Nanosecond passively Q-switched fibre laser using a NiS2 based saturable absorber
Abstract:
Q-switched pulse laser generation is successfully demonstrated in both Erbium-doped fibre laser (EDFL) and Thulium-doped fibre laser (TDFL) cavities by employing Nickel disulfide (NiS2) as a saturable absorber (SA). Q-switched pulse laser operation at 1.55 μm and 2.0 μm is obtained at low pump power levels of 37 mW and 48 mW, respectively. For the EDFL, stable passively Q-switched laser output at a wavelength of 1561.86 nm is achieved, with a minimum pulse duration of 237 ns and a repetition rate of 243.9 kHz. For the TDFL, the centre wavelength of the laser output is 1915.5 nm, with a minimum pulse duration of 505 ns and a repetition rate of 214.68 kHz. NiS2 is used as SA for Q-switched laser generation over a broadband wavelength for the first time.
Related Concept Videos
Gas Absorber
Gas absorbers are used to remove contaminants from gas streams. Multiple designs are used to accomplish this objective1. A packed bed column uses gas and liquid streams running counter to each other in a column packed with loose packing materials, such as ceramics, metals, and plastics, or structured packing1. The packed bed uses surface area created by the packing to...
Solution Equilibrium and Saturation
10:22High Speed Droplet-based Delivery System for Passive Pumping in Microfluidic Devices
10:42Design to Implementation Study for Development and Patient Validation of Paper-Based Toehold Switch Diagnostics
Switching of BJT
Cut-off Mode ("Off" State): In this state, both the emitter-base and collector-base junctions are...
03:49Quantitative Analysis of Vacuum Induction Melting by Laser-induced Breakdown Spectroscopy

