Electrorheological Characteristics of Poly(diphenylamine)/magnetite Composite-Based Suspension
Yu Zhen Dong1, Hyoung Jin Choi2
1Department of Polymer Science and Engineering, Inha University, Incheon 22212, Korea. 22152270@inha.edu.
Abstract:
Electro-responsive poly(diphenylamine)(PDPA)/Fe3O4 composite particles were prepared by the synthesis of PDPA particles using a chemical oxidative polymerization technique followed by loading nano-sized Fe3O4 particles onto PDPA via a chemical co-precipitation process. The morphological image of the PDPA/Fe3O4 particles was characterized by scanning electron microscope and transmission electron microscope. The crystalline structure was scrutinized by X-ray diffraction. The rheological characteristics of the suspension composed of PDPA/Fe3O4 particles suspended in silicone oil were investigated by a rotation rheometer, demonstrating standard electrorheological (ER) characteristics with a dramatic increase in shear stress and dynamic moduli under the application of an electrical field strength. The shear stress curves under an electrical field could be described using the Bingham model and the yield stress showed a power-law relationship with the electric field strength with an exponent of 1.5, following the conduction model. Furthermore, the frequency-dependent dielectric behaviors of the PDPA/Fe3O4 ER suspension was tested using an inductance (L)-capacitance (C)-resistance (R) (LCR) meter. The dielectric properties were well described using the Cole-Cole equation and were consistent with the results of the ER experiments.
Related Concept Videos
12:22Synthesis of Thermogelling Poly(N-isopropylacrylamide)-graft-chondroitin Sulfate Composites with Alginate Microparticles for Tissue Engineering
Generation of Magnetite-Embedded Bacterial Nanocellulose Pellicles
08:08Fabrication and Design of Wood-Based High-Performance Composites
07:13Nanostructured Ag-zeolite Composites as Luminescence-based Humidity Sensors
Solution Composition During Acid/Base Titrations
The α0 and α1 values...
06:26Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method


