Demonstration of polarization control GaN-based micro-cavity lasers using a rigid high-contrast grating reflector

Tsu-Chi Chang1, Kuo-Bin Hong1, Shuo-Yi Kuo1

  • 1Department of Photonics, College of Electrical and Computer Engineering, National Chiao Tung University, Hsinchu, 30010, Taiwan.

Scientific Reports
|September 12, 2019
PubMed

Related Concept Videos

Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements14:18

Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements

A protocol to detect and automate mode locking in a pre-adjusted nonlinear polarization rotation fiber laser is presented. The detection of a sudden change in the output polarization state when mode locking occurs is used to command the alignment of an intra-cavity polarization controller in order to find mode-locking...
11.9K
Construction and Characterization of External Cavity Diode Lasers for Atomic Physics09:10

Construction and Characterization of External Cavity Diode Lasers for Atomic Physics

This is an instructional paper to guide the construction and diagnostics of external cavity diode lasers (ECDLs), including component selection and optical alignment, as well as the basics of frequency reference spectroscopy and laser linewidth measurements for applications in the field of atomic...
28.5K
The Rigid Tube as an Alternative in Controlling the Problematic Airway08:26

The Rigid Tube as an Alternative in Controlling the Problematic Airway

Presented here is a protocol of tracheal intubation over an intubating tube introducer using a rigid tube for laryngoscopy with an attached light source. The main characteristics of this maneuver are the retromolar approach and the use of the thyroid cartilage as a landmark while advancing the rigid...
6.8K
Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System12:08

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System

The fabrication of high contrast gratings as the parallel spectrum splitting dispersive element in a concentrated photovoltaic system is demonstrated. Fabrication processes including nanoimprint lithography, TiO2 sputtering and reactive ion etching are described. Reflectance measurement results are used to characterize the optical performance.
11.1K
A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings08:23

A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings

A protocol to create a full-range linear displacement sensor, combining two packaged fiber Bragg grating detectors with a magnetic scale, is...
6.7K
Writing Bragg Gratings in Multicore Fibers08:48

Writing Bragg Gratings in Multicore Fibers

We describe a technique for inscribing identical fiber Bragg gratings into each core of a multicore fiber. This is achieved by introducing an additional surface into the optical path to mitigate lensing by the curved surface of the fiber...
8.6K